PowerColor Teases Red Devil RX 480 Videocard

TUL Corporation is about to hit the market with an off-beat gaming graphics card, based on AMD Radeon RX 480 GPU. The PowerColor Red Devil RX 480 8 GB GDDR5 employs a retrofitted PCB with the 6+1-phase VRM. The board incorporates a single 8-pin connector, instead of a 6-pin one.

Like the etalon model, the creation from TUL uses the 4th-gen AMD GCN architecture & AMD Polaris 10 GPU. The integrated GPU features 2304 stream processors, 144 TMUs and 32 ROPs. Its clock frequency index makes up 1330 MHz. The core cooperates with 8 GB of GDDR5 memory (256-bit interface) that runs at 2000/8000 MHz frequency (base/efficient). The list of external interfaces boasts three DisplayPort ports, one HDMI and one DVI-D port.

The Red Devil RX 480 8 GB GDDR5 comes equipped with a brand Double Blade III cooler. It consists of four nickel-plated heatpipes (2x 6 mm, 2x 8 mm), an aluminum heatsink as well as three 80-mm fans. The latter are developed on double ball-bearings.

Pricing is …

Western Digital Enters the Market with My Cloud EX2 Ultra NAS

WD came out with a new enterprise-class storage, entitled My Cloud EX2 Ultra. The model is intended for the installation of two HDDs with the maximal capacity of 12 TB. According to the manufacturer, this NAS will be a perfect choice for professionals who require automatic data synchronization, file sharing, data backup, etc.

WD My Cloud EX2 Ultra is based on 1.3-GHz CPU accompanied by 1 GB DDR3. The pair ensures the realization of fast data transferring as well as smooth video streaming. The compatible drives support RAID 0/1, JBOD & Spanning operational modes. Backup process might be realized in several ways: data backup to the other NAS, to the external storage via USB 3.0 port or to the cloud storage via LAN/WAN network.

The model is shipped with pre-installed HDDs (WD Red with support for NASware 3.0 technology), configured to operate in RAID 1. NASware 3.0 is called to improve solidity, minimize data loss prospects in case of power off or voltage surge. If required, …

QNAP to Come up with TS-x51 NAS Series

QNAP, a well-known designer of network and CCTV monitoring solutions, is glad to come up with a new series of NAS devices – the TS-x51. The series is currently introduced by two models with two and four drive sections. They are intended to operate under the base of Microsoft Hyper-V, Windows Server 2012, VMware VSphere, Citrix XENServer platforms. Both new-comers are housed in stylish white enclosures that match either home or corporate environment.

The TS-x51 storages are based on Intel processor with 2.4GHz clock frequency. It is accompanied by 1 GB RAM (DDR3L), 7.1-channel audio controller, and Wi-Fi 802.11ac adapter via an independent USB key. These NAS support the installation of SSD/HDD/SSHD drives of 3.5-inch form-factor with SATA III 6 Gb/sec interface. The frontal panel accommodates activity indicators, Power and Reset buttons, as well as a single USB 3.0 port.

To continue, both versions of storages offer imagery-data recording options and support virtual …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 18 September 2012, 12:28
Last visit: 18 September 2012, 12:43