ID-Cooling Hunter Duet II Liquid Cooling System

ID-Cooling, being famous for its cooling systems, has released a Hunter Duet II cooler of large dimensions, which is supposed to transfer heat from the CPU and the graphics engine surfaces. This model is designed with a 360 mm heat sink, which is of great benefit to its efficiency factor.



The construction includes two water units with a base out of copper and built-in pumps, pipes in braided cable, the three-section aluminum 395 × 120 × 27 mm heat sink, three 120 mm fans, and an extraordinary framework with a 90 mm fan to blow over graphics card load-bearing elements and intensive plates for the CPU and GPU.


Though possessing similar construction, water units differ in lids design and the location of holes for liquid flow. At the moment their inner structure details are not available.

A compact fan to blow over VRM consumes 1.2 W. Its rotary speed is not higher than 1,500 rpm. The same ratio of each of the three main fans is not supposed to exceed 1,500–2,000 rpm.

Graphics Card MSI R7870 Hawk Review

MSI, a large-scale manufacturer of computer hardware and consumer electronics, has introduced its new lineup of graphics cards, codenamed R7870 Hawk. The new series goes with the upgraded Radeon HD 7870 video adapter, improved integrated circuit and overclocking base. In addition, these graphics cards will go with the implemented GPU Reactor and Unlocked Digital Power technologies. Upon the whole, the introduced integration and performance is called to compete for the customers' favor with other high-end top models designed by Gigabyte and Asus.



Design and Layout


Design of R7870 Hawk somehow resembles a short-cut version of R7970 Lightning from MSI as well. It has similar design of cooling system covered with blue strip. The cover hides five heat pipes and rather compact fans. The rear part of the card is covered by a metallic plate; there is a plastic boot opposite the graphics chip that covers GPU Reactor block. This block is based on a separate detachable board and …

Computer Case be quiet! Silent Base 600 Overview (Part I)

The case be quiet! Silent Base 600 is offered in three colors: black, orange and silver, which differ only in color of inserts on the front panel. Additionally, each modification is supplied in two versions: with and without a window. This is a typical «middle tower» designed to set motherboards of ATX form-factor, Micro-ATX and Mini-ITX.





Packaging and Equipment

be quiet! Silent Base 600 is supplied in a medium-sized box, which is slightly wider than the standard packaging of Mid Tower class models. It has a schematic picture of the case and the list of its specifications. The box is equipped with recesses at the ends which makes transportation process much easier. Its weight is a little more than 9.5 kg.


The case inside is wrapped in a white non-woven fabric bag, and then sandwiched between two foam retainers. The content of delivery is packed in a small corrugated cardboard box. All the necessary screws, slides to install hard drives, four plastic ties for …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.36
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 25 May 2012, 17:55
Last visit: 25 May 2012, 17:55