Company XFX is preparing Radeon HD 7970 GE with Double Dissipation cooler

American vendor XFX is about two weeks to release a Radeon 7970 Edition Double Dissipation (model code — FX-797G-TDF). It combines the capabilities of GPU Tahiti XT2 with a higher overclocking potential and the TDP, rather than at Tahiti XT, PCB reference design, but without a single phase power supply (6 +1), and the cooling system in the vaporizing chamber, an array of aluminum fins, PA plate (the same heatsink for the VRM and memory), as well as the two fans standard size 90 mm.



New model will get the recommended for the Radeon HD 7970 GE frequency ratio 1000/6000 MHz for core and chips GDDR5. The graphics chip will operate at 1050 MHz in the load. Recall that the “usual” HD 7970 was limited to regular frequencies 925/5500 MHz and did not support dynamic overclocking.


The configuration of video outputs is almost standard: from the five of DVI-I, DVI-D, HDMI and 2x Mini DisplayPort for some reason excluded DVI-D. The additional power is supplied by one 8-pin and one …

HIS RX 460 4 GB Slim-iCooler OC Graphics Card with a Single-Slot Cooler

Welcome an extraordinary and a very interesting graphics adapter solution from HIS, namely the HIS RX 460 4 GB Slim-iCooler OC (HS-460R4TCNR). While most of competitive prototypes possess coolers with two slots, this sample is equipped with a single-slot cooling system. This highlighting moment lets HIS RX 460 4 GB Slim-iCooler OC occupy less place in a chassis.



The new product is based on the AMD Polaris 11 graphics engine and supports 896 streaming processors, 56 texture and 16 raster units. The GPU base clock matches the benchmark of 1090 MHz, and the dynamic frequency has increased from 1200 MHz to 1220 MHz. Video RAM encloses 4 GB GDDR5 chips with the 7000 MHz effective frequency and 128-bit bus, which goes in accordance with the reference scope of functionality.


The cooling system of HIS RX 460 4GB Slim-iCooler OC consists of a compact heatsink and an axial flow fan. The front-end interface set offers such ports as DVI, HDMI and DisplayPort.

ASRock Fatal1ty Z87 Killer: Motherboard for Fastidious Gamers and Overclockers

Hardware solutions from Fatal1ty series have been enjoying great popularity among gamers and overclockers since the first product came out. ASRock continues gladdening its fastidious devotees by introducing one more representative of Fatal1ty series – motherboard Fatal1ty Z87 Killer. It attracts potential customers by a powerful VRM system, prime-quality hardware base, and the implementation of KillerLane 2200 network chip that eliminates lags in online games.



ASRock Fatal1ty Z87 Killer is designed in ATX form-factor and is based on Intel Z87 chipset, targeted Intel Haswell processors (Core i3/i5/i7, Celeron, Pentium) for Socket LGA1150 platform. Memory subsystem supports up to 32 GB of two-channel DDR3 memory chips that run at the maximal 3050 MHz frequency. Power subsystem is organized according to 8-phase scheme; it consists of special MOSFET-transistors that are characterized by a low TDP level.


To continue, this motherboard accommodates three high-speed PCIe 3.0 x16 …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 13 November 2011, 10:35
Last visit: 15 November 2011, 11:05