Thermaltake Outs Core P5 Green Edition Chassis

A few months after the release of a chassis with an entirely open-air design, Thermaltake decided to release one more modular solution but with a gaudy exterior. The Core P5 Green Edition boasts bright-green coloring of one of the side plates as well as totally transparent other panels. The middle-tower case features 608x333x570 mm dimensions, similar to its predecessor. Likewise, the greenhorn has received analogous hardware base.



Therefore, Thermaltake Core P5 Green Edition is targeting the installation of mini-ITX, micro-ATX and full ATX motherboards with up to 8 expansion slots. Internal spacing offers 4 slots for 3.5-/2.5-inch drives and allows for the installation of quite long graphics cards (up to 320 mm), high CPU coolers (up to 180 mm) and standard power supply units (up to 200 mm in length).


The chassis might be cooled down by four 120-mm or three 140-mm fans, located on the left-side panel. As an alternative to the air cooling, the user can integrate …

New Graphics Card from Elsa with S.A.C. System

Elsa is currently preparing to launch an ingenious graphics card on the basis of Nvidia GeForce GTX 650 Ti adapter. Codenamed Elsa GeForce GTX 650 Ti S.A.C., is considered to be the 'quietest' card available in the market due to the implementation of Silent Air Cooling technology that keeps the noise level at the maximum of 25 dB. Under the manufacturer's ideas, its new creation will perfectly suit those people who long for low-noise desktop system operation.



Elsa GeForce GTX 650 Ti S.A.C. is developed on two-slot printed circuit board of 145 mm in length, specifically for PCI-e 3.0 x16 bus. This graphics solution houses GK106 chip with 768 CUDA cores and Kepler architecture; it's designed under 28 nm technological process. The nominal GPU frequency is estimated at 928 MHz. The maximal index of power consumption approximates 110W.


The integration of the graphics card involves 1024 MB memory of GDDR5 type which goes with 128-bit interface. The nominal memory clock frequency …

The Compulab IPC3 Mini-PC with Passive Cooling Goes for 693 USD

One of the latest products by Compulab is an IPC3 mini-PC, intended for industrial and commercial use. The lowest price of the basic model is 693 USD.



Outside dimensions of the framework are 160 х 190 х 40 mm. Due to its exterior construction the case provides overall passive cooling.


There’s a possibility to install 32 GB of RAM, a 2.5” storage drive, an M.2 2260 SSD and a couple of devices with an mSATA connector. The novelty features wireless interface adapters along with two USB 2.0, four USB 3.0, two Gigabit Ethernet, a DisplayPort 1.2, an HDMI 1.4a and an S/PDIF ports. However, special modules will be able to extend this set of connectors.


The Compulab IPC3 Mini-PC operates an Intel Kaby Lake CPU and is protected by the five-year manufacturer warranty.
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.43
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 05 November 2011, 10:00
Last visit: 05 November 2011, 10:00