King’s on the Footprint: Nvidia Boasts Titan X Adapter

The much-anticipated release of Nvidia’s GeForce GTX Titan X graphics adapter has already come true. The new-comer employs the latest flagship GM200 GPU (Nvidia Maxwell architecture) that comprises 8 billion transistors, 24 SMM blocks (each includes 128 CUDA cores and 8 TMUs). As a result, the GPU consists of 3072 CUDA cores and 192 TMUs – a record-breaking layout. The amount of ROPs makes up 96.



Nvidia GeForce GTX Titan X runs at 1000 MHz nominal frequency but might be overclocked to 1075 MHz frequency. Memory subsystem is compiled of 12 GB of GDDR5 modules which operate at 7010 MHz frequency. The bandwidth index of 384-bit bus approximates 336.5 Gb/sec. Consequently, an overall computation power is estimated at 7.0 TFLOPS.


Cooling is organized with the assistance of a two-slot cooler with a single fan. Connectivity facilities include three video ports: DisplayPort, DVI-I and HDMI. On active mode, the maximum allowed GPU temperature should not exceed 92 C. The utmost …

PowerColor Intros New Graphics Card with Fling Force Cooler

TUL Corporation, in the framework of its PowerColor brand, introduces a new graphics card with quite an original way of air cooling organization. The new-coming adapter, codenamed PowerColor Radeon HD 7850 Fling Force, employs 'two-storied' cooler of an unusual structure. Along with an aluminum heatsink, copper heat pipes, and a voluminous fan, the manufacturer implemented non-monolithic fan ribs. Their tips are fixed to the main part in a way to change their location relative to the plain of rotation.



On conditions of low rotational speed, tips of the ribs are located at approximately 80 degrees angle relative to the graphics card. On conditions of heightened speed, the ribs become more linear; this way, the impeller diameter enlarges from 92 mm to 95 mm. Such structural approach to the fan framework develops into an improved performance and air cooling effect.


The model is based on Pitcairn chip, developed on Graphics Core Next architecture under 28 nm technological …

A Triplet of Waterblocks for Titan Z Graphics Solutions from EK Water Blocks

EK Water Blocks, a well-known Slovenian manufacturer of enthusiast-level liquid coolers for GPUs, has just introduced a triplet of waterblocks for the newly arrived Nvidia GeForce GTX Titan Z adapters. The EK-FC Titan Z – Nickel, EK-FC Titan Z – Nickel (Original CSQ) and EK-FC Titan Z – Acetal + Nickel models are sure to provide the maximal cooling at the highest frequencies both for dual- GPUs and memory chips. All the blocks come with a transparent acrylic cover and a lid from POM ACETAL plastic.



EK-FC Titan Z waterblocks are attributed to full-cover solutions. This implies that they efficiently remove heat not only from graphics cores, but also from GDDR5 memory chips, as well as from voltage regulators of VRM subsystem. Areas in direct contact with the GPUs are equipped with micro-channels of 0.7 mm width. The blocks maintain resistance to the coolant stream; hence, they might be employed along with low-power pumps.


The waterblocks features copper nickel-plated …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 10 July 2012, 02:16
Last visit: 10 July 2012, 02:29