ID-Cooling Hunter Duet II Liquid Cooling System

ID-Cooling, being famous for its cooling systems, has released a Hunter Duet II cooler of large dimensions, which is supposed to transfer heat from the CPU and the graphics engine surfaces. This model is designed with a 360 mm heat sink, which is of great benefit to its efficiency factor.



The construction includes two water units with a base out of copper and built-in pumps, pipes in braided cable, the three-section aluminum 395 × 120 × 27 mm heat sink, three 120 mm fans, and an extraordinary framework with a 90 mm fan to blow over graphics card load-bearing elements and intensive plates for the CPU and GPU.


Though possessing similar construction, water units differ in lids design and the location of holes for liquid flow. At the moment their inner structure details are not available.

A compact fan to blow over VRM consumes 1.2 W. Its rotary speed is not higher than 1,500 rpm. The same ratio of each of the three main fans is not supposed to exceed 1,500–2,000 rpm.

Meet New Super Cooler PH-TC12DX from Phanteks

Phanteks decided to amaze the public by releasing a new high-performance cooler PH-TC12DX that is able to cope with practically any up-to-date CPU from Intel or AMD. The sales campaign has started from the USA market where the model goes at $55-$60; the price depends on the color version: coolers with black fan impellers and heatsinks go at $55, while models with red, blue or write components cost $60.



Phanteks PH-TC12DX features tower-like framework. Its construction consists of two heatsink blocks, four U-shape heat pipes that pierce those blocks, and two voluminous 120 mm fans which are located on both sides of aluminum heatsink blocks. The latter are designed with an unusual shape of impellers, known as Maelstrom Vortex Booster (MVB). This cooler is equipped with PWM controller that monitors and regulates fan rotational speed; thus, the speed might be adjusted to the minimal 600 RPM and to the maximal 1800 RPM.


The implemented type of bearings provide for 150000 hours …

Unusual PC Monitor HP Envy 27 Review

High-end PC monitors segment is abundant in models of different frameworks, designs and facilities. Nevertheless, the majority of manufacturers offer rather alike solutions, leaving demanding consumers dissatisfied. HP is the company known for challenging the rising demands, so the introduction of HP Envy 27 was an ‘expected surprise’ for all interested parties. This monitor distinguishes itself by an unusual design, remarkable specifications, and traditionally high price. It’s time to vindicate those privileges de visu.



General Specifications


PC Monitor HP Envy 27 features the following specifications:

— dimensions: 622x454x140 mm, weight — 6.9 kg;

— panel: type — AH-IPS, backlight – W-LED, aspect ratio/diagonal – 16:9/27-inch, resolution – 1920x1080, maximal brightness – 250 cd/m2, response time – 7 ms (GtG), viewing angles – 178/178 (down/across), number of displayed colors – 16.7 m, contrast – 1000:1 (static) and 10M:1 (dynamic);

AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.41
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 22 January 2012, 11:55
Last visit: 05 February 2013, 14:13