D-Link Introduces New Storage Area Network Series DSN-6000

D-Link, a world-known manufacturer of network and telecommunications solutions, has officially introduced its two SAN models which are unified into a single series DSN-6000 iSCSI. The prime destination of this SAN series is to satisfy the needs of small and medium-sized business and to provide effective solutions of any emerging demands. DSN-6000 is characterized by the improved efficiency and performance index, as compared to the previous model lineups, on operation in virtual and physical environment.

The series is represented by two models: DSN-6410 iSCSI and DSN-6110 iSCSI. The both models go with the casing designed in 2U form factor, and is intended to be installed into a typical server frame. The models are equipped with twelve bays for drives and SAS interface. The cumulative volume capacity of the bays approximates to 36 Tb. DSN-6410 iSCSI is furnished with a couple of 10 Gigabit Ethernet ports, while the DSN-6110 iSCSI model accommodates four Gigabit Ethernet ports.

They Did It! Official Release of AMD Radeon HD 7990 ‘Malta’

Much rumored reference graphics adapter from AMD has been recently officially introduced. As it was suggested before, Radeon HD 7990, codenamed ‘Malta’, employs two Tahiti XT2 GPUs, each of which contains 128 TMUs, 32 rasterization blocks (ROPs), and 2048 current processors (GCN architecture). Smooth work of both graphics cores is synchronized by means of PLX PEX8747 controller that supports 48 lines of PCI Express 3.0. Nominal clock frequencies ascribed to GPUs operation equal to 950 MHz, but Turbo mode enables the increase of frequencies up to 1000 MHz.

Video memory is represented by GDDR5 memory modules, the overall capacity of which equals to 6 GB (3 GB per each graphics core). Memory modules utilize 384-bit bus and run at 6000 MHz frequency with bandwidth of 288 Gb/sec per core. The incorporated PCB accommodates a single CrossFireX socket for the creation of various graphics configurations, including Quad-CrossFireX. Video interface panel boasts the availability of …

Akasa Blade: Solid Mid Tower for gamers and enthusiasts

The range of chassis Mid Tower from the company the Akasa is added by new model called the Blade and its modification Blade Distinction Edition with a transparent window on the side wall, which are addressed in the first place for demanding users from among gamers and computer enthusiasts.

Both new products are painted black inside and out, have a grilled front panel and are available in versions with blue or red front LED. They are made of sheet steel of thickness 0.7 mm, have dimensions of 207 x 521,5 x 491,5 mm, compatible with standard Micro-ATX/ATX and have seven expansion slots.

Each of the buildings is equipped with one 3.5-inch and three 5.25-inch external bays, and has internal seats to install five 3.5-inch and three 2.5-inch drives. The maintenance of optimum temperature inside the products is managed by three fans, namely a 120-mm front, a 170-mm on the upper lid and one 120mm rear. In addition, realized the possibility of the application of liquid cooling …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 05 November 2012, 23:34
Last visit: 27 December 2012, 02:51