HIS Radeon R9 290 IceQ X2: Graphics Card with an Offbeat Cooler

HIS has recently replenished its Radeon R9 series of graphics cards with a new model – the Radeon R9 290 IceQ X2. Based on AMD Hawaii Pro chip, this card is a combination of an ultimate efficiency and an offbeat design. The integrated GPU runs at an etalon frequency — 947 MHz. No changes have been incorporated into the frequency mode of GDDR5 memory: the 4 GB memory with 512-bus interface runs at nominal/effective 1250/5000 MHz frequency.



The major peculiarity pertained to the model is the employment of a proprietary two-slot cooler, codenamed IceQ X2. It consists of a spacious copper base (40x47.5 mm), a large aluminum heatsink, a pair of 89 mm fans, and five nickel-plated heatpipes: 2x 8 mm and 3x 6 mm. The cooler also accommodates additional heatspreaders, which dissipate heat in memory and VRM sections. Moreover, the framework boasts a dedicated stiffening plate that reduces loading on the printed circuit board.


To continue, HIS Radeon R9 290 IceQ X2 comes with two …

ID-Cooling Hunter Duet II Liquid Cooling System

ID-Cooling, being famous for its cooling systems, has released a Hunter Duet II cooler of large dimensions, which is supposed to transfer heat from the CPU and the graphics engine surfaces. This model is designed with a 360 mm heat sink, which is of great benefit to its efficiency factor.



The construction includes two water units with a base out of copper and built-in pumps, pipes in braided cable, the three-section aluminum 395 × 120 × 27 mm heat sink, three 120 mm fans, and an extraordinary framework with a 90 mm fan to blow over graphics card load-bearing elements and intensive plates for the CPU and GPU.


Though possessing similar construction, water units differ in lids design and the location of holes for liquid flow. At the moment their inner structure details are not available.

A compact fan to blow over VRM consumes 1.2 W. Its rotary speed is not higher than 1,500 rpm. The same ratio of each of the three main fans is not supposed to exceed 1,500–2,000 rpm.

Ultrathin 2.5-inch SSDs from Biwin

Biwin America, Inc., a global manufacturer of solid-state drive solutions for client and corporate needs, has officially announced the release of 2.5-inch SSDs with slim-profile casings. It should be mentioned that decrease in casing dimensions touched upon all 2.5-inch products and series manufactured by the company, including Smart, Pro and Elite Series with SATA 3 and SATA 2 interfaces, as well as Drive NX and NuvoDrive PX Series with SATA 3 interfaces.



Previously all SSDs were developed in 9.5 mm-thin casings, but the current modifications allowed Biwin to decrease the dimensions to 7 mm. This is twenty-six percent less than with preceding models. Hence, slim-profile SSDs are applicable in more compact devices; they are destined to be installed in 1U and 2U server stands. This is called to increase the deployment capacity of the server without sufficient investments. Biwin 7 mm SSDs casings are made of black anodized aluminum to ensure fail-proof characteristics of the …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.43
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 01 December 2011, 07:37
Last visit: 01 December 2011, 10:00