New Midi-Tower Chassis Series Xpredator X1 from Aerocool

The line of chassis designed by Aerocool has been supplemented by a new Xpredator series codenamed X1. The series is developed in midi-tower form-factor and will be of particular interest to gamers and enthusiasts. The chassis is ready to support the motherboards of ATX and micro-ATX standard, CPU coolers up to 158 mm in height and graphics cards up to 400 mm in length. As one might see, internal layout is quite spacious and does not yield to the full-tower models.

Aerocool Xpredator X1 is delivered in black and white edition. Both editions are distinguished by a splashy and provoking design. Black edition combines black casing, scaly red top panel, and grid-like red frontal panel. White edition combines white casing with black inclusions. The casing itself is made of SPCC steel which reliably protects all internal components from adverse external factors.

Xpredator X1 is able to accommodate up to twelve 120 mm fans. Three fans can be installed on the frontal panel, …

PC-Cooling Releases a New Chassis under Cooltek Brand

All those people who look for a small-sized and classic chassis for HTPC system have got a wonderful opportunity to implement their longing into life. PC-Cooling GmbH has introduced its new PC case, codenamed Coolcube, under Cooltek brand. Such an engaging name totally corresponds to the case's framework: cubic case made of anodized aluminum and painted black. Featuring 210x200x240 mm dimensions, the product is estimated for the installation of mini-ITX motherboards. The case itself contains a large number of ventilation holes in the side and rear parts.

The number of PCI expansion slots equals to two, but there is no a dedicated bay for 5.25-inch drives. However, there is room for the installation of a single 3.5-inch drive and one 2.5-inch drive. The length of supported graphics cards should not exceed 185 mm, while the height of supported CPU coolers should not exceed 80 mm.

The most striking thing is that this chassis model is compatible with the majority power supply …

Enermax Announces Fulmo ST ECA3270 Flagship PC Chassis

Enermax boasts a new Mid-tower PC chassis developed specifically for inveterate gamers. Codenamed Fulmo ST ECA3270, this chassis is ready to welcome the motherboards of ATX or micro-ATX form-factor, along with eight expansion slots. In retail sale the model will be available in two variations: Fulmo ST ECA3270A and Fulmo ST ECA3270B. The difference between them lies in the color of cases (black and gray-black) and in the amount of pre-installed fans.

Upon the whole, Enermax has taken care about sufficient internal spacing for the creation of a really powerful gaming system. Thus, the chassis is able to house CPU coolers of up to 185 mm height, three two-slot graphics cards with the maximal length of 286 mm; it’s also feasible to free some space for more lengthy adapters (up to 412 mm), due to the demounting of dedicated drive bays. Fulmo ST ECA3270 has got enough space for the installation of eight 3.5/2.5-inch drives. The nominal delivery set contains an additional bay for a …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 23 September 2012, 19:13
Last visit: 25 October 2012, 07:35