MSI Releases an Affordable Motherboard of Micro-ATX Form-Factor

Right after the release of FM2-A75MA-P33 motherboard, MSI has taken a decision to design one more model for AMD Trinity platform. Codenamed MSI FM2-A85XMA-E35, a new model is based on a more efficient chipset – AMD A85X. This motherboard is a typical representative of entry-level solutions, though can boast a number of attractive facilities.

MSI FM2-A85XMA-E35 is developed in micro-ATX form-factor for Socket FM2 CPU sockets. The model is known to support AMD A and Athlon II processors. This board accommodates two DIMM slots for the installation of DDR3 memory modules, the overall volume of which can rise up to 32GB. The supported memory operating frequencies might vary: DDR3-1066 MHz, 1333MHz, 1600 MHz, 1866 MHz, and 2133 MHz. Power subsystem features a rather unpretentious framework and consists of five phases; thus, this model isn't intended for overclocking purposes.

Expansion facilities implemented in MSI FM2-A85XMA-E35 can be found in any other entry-level …

New Midi-Tower Chassis Series Xpredator X1 from Aerocool

The line of chassis designed by Aerocool has been supplemented by a new Xpredator series codenamed X1. The series is developed in midi-tower form-factor and will be of particular interest to gamers and enthusiasts. The chassis is ready to support the motherboards of ATX and micro-ATX standard, CPU coolers up to 158 mm in height and graphics cards up to 400 mm in length. As one might see, internal layout is quite spacious and does not yield to the full-tower models.

Aerocool Xpredator X1 is delivered in black and white edition. Both editions are distinguished by a splashy and provoking design. Black edition combines black casing, scaly red top panel, and grid-like red frontal panel. White edition combines white casing with black inclusions. The casing itself is made of SPCC steel which reliably protects all internal components from adverse external factors.

Xpredator X1 is able to accommodate up to twelve 120 mm fans. Three fans can be installed on the frontal panel, …

Chieftec Launches Flyer Series FS-01B-U3 Chassis

Chieftec, a well-known German designer of prime-class hardware pieces, advertises the launch of a new budgetary mini-tower PC chassis, entitled Flyer Series FS-01B-U3. The model features 420x175x360 mm dimensions and is ready to welcome mATX and mini-ITX motherboards. The case boasts a totally black exterior with a glossy frontal panel and metallic patches on it.

This chassis comes with a pre-installed iArena power supply unit of 350/450 W capacity. It is based on CWT platform. The inventory also includes a pair of 5.25-inch optical drive bays, four 3.5/2.5-inch HDD/SSD bays. The case accommodates four PCI expansion slots that support the installation of rather lengthy graphics cards (up to 320 mm). Internal layout allows for the employment of standard CPU coolers of up to 130 mm in height.

I/O panel is located on the frontal facet. It is represented by two USB 3.0 ports and two audio jacks. In terms of cooling, Flyer Series FS-01B-U3 provides for quite versatile fan …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 04 December 2011, 13:41
Last visit: 04 December 2011, 13:44