SilverStone Debuts with SX700-LPT Power Supply Unit

SilverStone is readying to launch a powerful 700-watt PSU, entitled SX700-LPT. The new-comer boasts 80Plus Platinum certificate, since its efficiency level might reach 94%. The model is developed in SFX-L form-factor and supports Intel ATX 12V 2.4 standard. SilverStone has already listed the unit on its official site; thus, customers might expect the market launch in the nearest future.

SilverStone SX700-LPT employs a single +12V rail with the maximal output capability of 58.4 A. This power supply unit is able to operate within 90-264 V range at the peak power index of 750 W. If there is a need, it’s possible to use the entire power stock via +12V bus, rather than distributing it via +3.3 V or +5 V rails.

The model comes with a modular cable system. The inventory includes connectors for the connection of 9 SATA devices as well as 4 videocards with an additional 6+2-pin PCI-e connector. The unit is fitted with all necessary protection mechanisms, entailing SCP, OPP, OPT, …

Which DDR3 SDRAM is better for Ivy Bridge

The overclocker memory is now in the category of products for perfectionists, still the common users are pleased with usual modules DDR3-1600 or DDR3-1333 SDRAM. The issue appears related to the release of processors Ivy Bridge series, which in some aspects are similar to its predecessors, still have some distinctive features.

Ivy Bridge processors are restricted on the maximum frequency supported by the DDR3 SDRAM. This indicates the theoretical chance of these processors work with high-speed memory DDR3-3200 SDRAM. Developers of overclocker memory package perceived the change in rules with certain enthusiasm: there are DDR3-2400 modules available in stores. The gap in frequencies of «elite» and «running» versions of the memory has grown twice in size. It won’t have a noteworthy blow on the work of commonly used tasks in systems.

The memory controller in the Ivy Bridge can work both in symmetric mode, with delay, frequency and volume modules in memory channels, and …

HIS Teases New Radeon R9 280X IceQ Boost Clock Graphics Card

HIS is glad to introduce one more high-end solution: the Radeon R9 280X IceQ Boost Clock graphics card that is targeting high-performance PC systems. The model employs turbine-type cooling system with a branded IceQ cooler. It consists of a voluminous copper base (35x28 mm), an aluminum heatsink, four nickel-plated heat-pipes (2x 8 mm and 2x 6 mm), as well as a single 80 mm turbine fan. Such cooling is ideal for multi-GPU configurations in AMD CrossFireX mode, since the distance between adapters does not influence the efficiency of their fans.

The new-comer is based on AMD Radeon R9 280X GPU (28 nm, GCN) with 2048 stream processors. It runs at standard frequencies: 850 MHz – nominal and 1000 MHz – dynamic. Memory is introduced by 3 GB GDDR5 modules, which run at standard 1500 MHz frequencies and reach some 6000 MHz effective index.

To continue, HIS Radeon R9 280X IceQ Boost Clock features four connectivity interfaces: a pair of mini-DisplayPort ports, one DVI-I and …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 27 December 2011, 08:49
Last visit: 27 December 2011, 08:49