MSI B75IA-E33 - cost-effective Mini-ITX board for processors Ivy Bridge

In early August, it was mentioned about the fact that MSI developer of motherboards is preparing to release three new products in the form factor Mini-ITX on chipsets A85, B75, and Z77. As it turned out, the first low-cost board will be MSI B75IA-E33 — it will start selling in Europe at the end of this week at prices ranging from € 95.

The functionality of this product is limited with respect to the other two models; however, a set of components in B75IA-E33 is very decent. LGA1155 processor socket is energized by three phases (provides additional power to the ATX12V 4-pin), hidden under a small cooler chipset Intel B75. Available one connector PCI Express 3.0 x16, two slots for memory modules DDR3-1066/1333/1600 total up to 16 GB, SATA port 6Gb / s and SATA 3 Gbit / s (3 units) to connect storage devices.

A pair of USB 3.0 on the rear panel are completed with a 19-pin connector on the PCB, through which on the front panel I / O can be taken two SuperSpeed USB. The …

New chassis Aerocool XPredator - Evil Blue and Devil release

One of the popular chassis series Aerocool — XPredator – is relevant again, thanks to the emergence of two new design options the Evil Blue and Devil Red. Apart from a small «cosmetic repairs» newcomers got two ports USB 3.0.

Full-Tower hulls of XPredator Evil Blue and Devil Red (respectively, black and blue and black and red) are made from cold rolled galvanized steel with a thickness of 0.8 and 1.0 mm. Their weight is about 13.4 kg, dimensions — 600 (H) x 234 (W) x 555 (D).

Inside, can be placed the motherboard form factor XL-ATX, E-ATX, ATX, microATX and Mini-ITX, ten PCI Express expansion cards up to 330mm, CPU cooler up to 185mm, ATX-compatible power supply, six 3 5-inch hard drives and the same amount of devices size 5.25 ". Kit includes two 230-mm fans: Front with lighting and rear without lighting.

Ease of assembly is guaranteed by the availability for screwless installation of drives and video cards, holes with rubber «curtains» for cables and …

Greeting One More Chassis of Urban Series from Thermaltake

Following the release of Urban S31 PC chassis, Thermaltake put its best foot forward to introduce one more representative of Urban series – Urban S41. This is a mid-tower case of a minimalistic design, with totally black exterior and interior. The model is vested in SECC steel coverage and will be available in two framework variations: with a large side-facet window and without it. In its entirety, the chassis features 516x220x520 mm dimensions and weighs 8.9 kg.

Thermaltake Urban S41 is ready to welcome all contemporary motherboards of ATX and micro-ATX standard. Despite its mid-tower framework nature, its internal capacity does not yield to some full-tower case species. Therefore, it positions four external drive bays of 5.25-inch format, five internal bays for 3.5-inch or 2.5-inch drives, and seven slots for PCI expansion cards. Additionally, the case is equipped with an external top-facet dock for the installation of drives with SATA interface (HDD/SSD). The frontal I/O …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 18 July 2011, 02:09
Last visit: 18 July 2011, 02:09