Motherboard Gigabyte G1.Sniper 3 Review

The development of motherboard segment was always characterized by experiments and competition. In earlier times manufacturers tried to differentiate their products by color and delivery set configurations. Nowadays the conjuncture seems to be quite similar, although contemporary technological approaches presuppose the development of motherboards from scratch, while the remnants from the past used ready-made base. Motherboard Gigabyte G1.Sniper 3 belongs to the generation of exclusive products with solid and high-end components, as well as original design.

Design and Framework

Gigabyte G1.Sniper 3 design is differentiated by the predominance of dark colors, but due to the bright-green radiator embedding, PEG-slots and memory slots coloring, the motherboard looks brisk. Enlarged dimensions are considered to be the major distinction of this motherboard from other products. This model is developed in XL-ATX form-factor that can be compatible only with full-tower casings. The …

Crucial Showcases Voluminous MX300 Solid-State Drives

Crucial is about to launch a new series of voluminous SSDs, entitled MX300. The lineup consists of 2.5-inch models with thin cases (7 mm only), targeting as desktop so mobile platforms. Additionally, the delivery set offers a dedicated 2.5-inch frame for the installation into a 9.5-inch bay. The capacity of drives makes up 275 GB, 525 GB, 750 GB, 1 TB, and 2 TB.

SSDs Crucial MX300 is developed on 32-layer Micron 3D NAND TLC chips (48 GB) as well as Marvell 88SS1074 controller. Data transfer process is realized via SATA III (6 Gb/sec) interface. The maximal sequential Read/Write speed equals to 530 MB/sec/510 MB/sec. In its turn, the maximal random data transfer index approximates 83.000/92.000 IOPS (Read/Write).

The greenhorns are thought to support the following technologies: AES, ECC, T.R.I.M., Data Path Protection, S.M.A.R.T., Active Garbage Collection, Power Loss Prevention, and Extreme Energy Efficiency. Besides, Dynamic Write Acceleration identifies and writes the …

MSI B75IA-E33 - cost-effective Mini-ITX board for processors Ivy Bridge

In early August, it was mentioned about the fact that MSI developer of motherboards is preparing to release three new products in the form factor Mini-ITX on chipsets A85, B75, and Z77. As it turned out, the first low-cost board will be MSI B75IA-E33 — it will start selling in Europe at the end of this week at prices ranging from € 95.

The functionality of this product is limited with respect to the other two models; however, a set of components in B75IA-E33 is very decent. LGA1155 processor socket is energized by three phases (provides additional power to the ATX12V 4-pin), hidden under a small cooler chipset Intel B75. Available one connector PCI Express 3.0 x16, two slots for memory modules DDR3-1066/1333/1600 total up to 16 GB, SATA port 6Gb / s and SATA 3 Gbit / s (3 units) to connect storage devices.

A pair of USB 3.0 on the rear panel are completed with a 19-pin connector on the PCB, through which on the front panel I / O can be taken two SuperSpeed USB. The …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 24 October 2011, 00:46
Last visit: 24 October 2011, 01:39