Greeting Asus Maximus VI Formula Gaming Motherboard

Asus is going to put on sale its newest LGA1150 motherboard of ROG (Republic of Gamers) series, entitled Maximus VI Formula. The board features ATX form-factor and is based on Intel Z87 chipset that supports all Haswell-based Intel Core processors. The most peculiar thing about the new-comer is the availability of ROG Armor enclosure that covers the PCB on both sides. The top cover is made of ABS; it prevents the heat produced by the surrounding components (i.e. graphics adapters) from warming up the CPU and VRM systems. The rear cover is made of SECC steel that stops the PCB from bending.



Motherboard Maximus VI Formula houses four DIMM slots that support up to 32 GB dual-channel DDR3 memory modules with up to 3100 O.C MHz frequencies. 8-channel VRM system consists of NexFET transistors, Black Wing throttles, and high-efficiency solid-state capacitors. All power components are cooled down by a dedicated heatsink that is a part of a liquid-cooling system. This motherboard model …

The Introduction of Transparent Chassis from Scythe

Scythe has recently amazed the community by the introduction of absolutely transparent chassis. ACB-Type3 model preserves the cutout of the standard Mid-Tower chassis solutions, but is made of transparent acrylic plates. One more peculiarity of this model is the parallel to the base localization of motherboard. Besides, ACB-Type3 is compatible with motherboards of various form-factor, including mini-ITX, micro-ATX, and ATX.



The motherboard is accommodated on a special tray. Right under this tray the customers are able to find a set of bays designated for the installation of PSU, three 3.5-inch drives, a couple of 2.5-inch drives, and three 5.25-inch drives. The chassis is compatible with CPU coolers of up to 190 mm in height.


At the same time, this model goes without any fans or side panels; this attributes the model to Open-Air segment. The product can content itself with practically noiseless passive system.


Scythe ACB-Type3 is equipped with sufficient number of …

PC-Cooling Releases a New Chassis under Cooltek Brand

All those people who look for a small-sized and classic chassis for HTPC system have got a wonderful opportunity to implement their longing into life. PC-Cooling GmbH has introduced its new PC case, codenamed Coolcube, under Cooltek brand. Such an engaging name totally corresponds to the case's framework: cubic case made of anodized aluminum and painted black. Featuring 210x200x240 mm dimensions, the product is estimated for the installation of mini-ITX motherboards. The case itself contains a large number of ventilation holes in the side and rear parts.



The number of PCI expansion slots equals to two, but there is no a dedicated bay for 5.25-inch drives. However, there is room for the installation of a single 3.5-inch drive and one 2.5-inch drive. The length of supported graphics cards should not exceed 185 mm, while the height of supported CPU coolers should not exceed 80 mm.


The most striking thing is that this chassis model is compatible with the majority power supply …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.36
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 24 December 2011, 13:48
Last visit: 24 December 2011, 15:43