The Compulab IPC3 Mini-PC with Passive Cooling Goes for 693 USD

One of the latest products by Compulab is an IPC3 mini-PC, intended for industrial and commercial use. The lowest price of the basic model is 693 USD.



Outside dimensions of the framework are 160 х 190 х 40 mm. Due to its exterior construction the case provides overall passive cooling.


There’s a possibility to install 32 GB of RAM, a 2.5” storage drive, an M.2 2260 SSD and a couple of devices with an mSATA connector. The novelty features wireless interface adapters along with two USB 2.0, four USB 3.0, two Gigabit Ethernet, a DisplayPort 1.2, an HDMI 1.4a and an S/PDIF ports. However, special modules will be able to extend this set of connectors.


The Compulab IPC3 Mini-PC operates an Intel Kaby Lake CPU and is protected by the five-year manufacturer warranty.

Evga to Launch a Powerful PSU SuperNova 1000 G2

Evga, a celebrated American developer of varied PC components for enthusiasts, is going to launch its new power supply unit targeting rather demanding consumers. Entitled Evga Supernova 1000 G2, this model is differentiated by 1000W power and not less than 90% efficiency on typical loading. Such outstanding characteristics permitted the PSU to gain 80Plus Gold certificate that testifies its brilliant specifications.



This PSU model is equipped with all prime-quality Japanese capacitors with solid-state electrolyte, as well as with a vertical two-layer main converter. In addition, there is an advanced protection system on board that saves the unit from various uncommon conditions (overheating, overvoltage, short circuit, voltage drops).


To continue, Supernova 1000 G2 may boast the availability of modular cable system. Herein, the cables feature quite an unusual design that facilitates the airflow within the chassis. The system consists of a single 24-contact ATX cable, a …

Thermaltake Outs Core P5 Green Edition Chassis

A few months after the release of a chassis with an entirely open-air design, Thermaltake decided to release one more modular solution but with a gaudy exterior. The Core P5 Green Edition boasts bright-green coloring of one of the side plates as well as totally transparent other panels. The middle-tower case features 608x333x570 mm dimensions, similar to its predecessor. Likewise, the greenhorn has received analogous hardware base.



Therefore, Thermaltake Core P5 Green Edition is targeting the installation of mini-ITX, micro-ATX and full ATX motherboards with up to 8 expansion slots. Internal spacing offers 4 slots for 3.5-/2.5-inch drives and allows for the installation of quite long graphics cards (up to 320 mm), high CPU coolers (up to 180 mm) and standard power supply units (up to 200 mm in length).


The chassis might be cooled down by four 120-mm or three 140-mm fans, located on the left-side panel. As an alternative to the air cooling, the user can integrate …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 23 October 2011, 06:24
Last visit: 04 April 2012, 12:44