Network Storage EonNAS Pro 500 Review

Everlasting practice proves that people are more inclined to buy products designed by well-known, established companies, and treat with certain mistrust towards start-up manufacturers. However, 'new' does not mean 'of poor quality'. Infotrend got little attention from the part of customers, but it still manages to produce high-quality and high-performance storage systems. Its latest development, network storage EonNAS Pro 500, deserves special attentions due to competitive facilities and attractive price.



Design Peculiarities


Network storage EonNAS Pro 500 is intended for the installation of five drives. This implies about the product's dimensions which equal to 17.5x24.5x22 cm without the cables. This model is distinguished by simple and strict design, as well as, a solid casing. The frontal panel is made of black dull plastic; the larger part of it is alloted for the drive bay which is covered by a lid. Each of the drive disk features a couple of activity indicators. The …

Biostar Announces N3150NH Mainboard with Integrated CPU

The inventory of Biostar’s mini-ITX motherboards was replenished by a new uncommon model – the N3150NH. Its key peculiarity is the availability of a 4-core Intel Celeron N3150 CPU onboard. The processor (Intel Braswell family, 14 nm technological process) comes equipped with an integrated Intel HD graphics core and a passive cooler. Its nominal clock frequency makes up 1.6 GHz, while on overclocking it accelerates up to 2.08 GHz frequency.



Biostar N3150NH houses two SO-DIMM slots, estimated for 8 GB DDR3-1600 MHz memory modules (two-channel operational mode). The connection of drives is realized via a pair of SATA III 6 Gb/sec ports. There is a possibility to install one expansion card thanks to a single PCI Express 2.0 x1 slot. Network facilities are ensured due to Realtek RTL8111H controller that supports SmartSpeedLAN utility, whereas audio production becomes possible due to the integration of Realtek ALC662 controller.


The connection of peripherals is enabled via …

Computer Case be quiet! Silent Base 600 Overview (Part II)

Internal structure

The motherboard compartment is located above the power supply unit. In this regard, everything is quite standard for a Mid Tower class. A large cutout is made in a tray behind a CPU socket, to allow installation of a CPU cooling system directly into the case; a backplate mount (thrust-pad located on the back side of the motherboard) is used for this purpose.


The four large slots in a tray, equipped with the silicone membrane, are designed for proper cable management which looks very promising here. Plugs of expansion slots are attached by thumbscrews. The front part holds a hard disks’ basket for three drives.


At the back side a slot in a tray can be clearly seen to access cable management system slot. Also, the rear side contains two tool kits for installation of solid-state drives and size 2.5" hard disks.


The side cover is made of 0.7 mm steel, and from the inside has a thick vibration and noise absorbing coating. The recess in the …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 04 May 2012, 05:56
Last visit: 19 June 2013, 17:53