Computer Case be quiet! Silent Base 600 Overview (Part II)

Internal structure

The motherboard compartment is located above the power supply unit. In this regard, everything is quite standard for a Mid Tower class. A large cutout is made in a tray behind a CPU socket, to allow installation of a CPU cooling system directly into the case; a backplate mount (thrust-pad located on the back side of the motherboard) is used for this purpose.


The four large slots in a tray, equipped with the silicone membrane, are designed for proper cable management which looks very promising here. Plugs of expansion slots are attached by thumbscrews. The front part holds a hard disks’ basket for three drives.


At the back side a slot in a tray can be clearly seen to access cable management system slot. Also, the rear side contains two tool kits for installation of solid-state drives and size 2.5" hard disks.


The side cover is made of 0.7 mm steel, and from the inside has a thick vibration and noise absorbing coating. The recess in the …

Arctic Releases Cooling System for AMD Graphic Adapters

Swiss manufacturer of cooling systems, Arctic Cooling, has recently released a new cooler developed specifically for graphic adapters from AMD. Earlier this year the company launched the cooling system which is compatible with graphic adapters from Nvidia developers. The new product, codenamed Accelero Hybrid 7970, distinguishes from its predecessor also by the foot of water block which is upgraded to be compatible with AMD HD 7900 series.



Cooling system Accelero Hybrid 7970 consists of two parts which boast as air, so water cooling standards. It is able to manage up to 320W of hot air. The water block is cooled down by the 120 mm fan which is able to achieve the speed in the measures of 400-1350 rpm. The block, that is installed on the board, is equipped with 80 mm fan and is able to achieve from 900 to 2000 rpm speed. The noise level is dwindled down to the minimal index.


Arctic representatives claim that their new water block is 200% more efficient than the nominal …

The Refined Envy 34 All in One PC from HP

At the CES 2017 event in Las Vegas, the HP Company has presented its new AIO type PC – Envy 34.



All the key electronic components are located in the base, which also holds speakers. This peculiarity makes the device thin and adds showiness to its layout. The display is curved and possesses a 34” IPS-panel with wide viewing angles and a resolution of 3440 × 1440 pixels. The aspect ratio is 21:9.


This product is equipped with the 7th generation Intel Core CPU and up to 16 GB of DDR4 RAM memory. Optionally a discrete NVIDIA GeForce GTX 950M or an AMD RX 460 graphic accelerator can be installed. One can choose to use either a 1 TB hybrid hard disk or a standard 1/2 TB HDD and a 256 GB SSD for data storage.


Among highlights, we may distinguish a webcam, which can be put out of sight into the framework, and Qi, the inbuilt system of wireless gadgets charging.


The initial cost of this all-in-one PC is $1750.
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 14 September 2012, 09:03
Last visit: 14 September 2012, 09:07