ECS Implements Advanced Technologies in Z77H2-A5X Deluxe

ECS is going to release a new motherboard Z77H2-A5X Deluxe developed under the latest technologies with the highest quality standards. The model belongs to ECS Black Series and is predestined specifically for experienced users, overclockers, and just demanding customers. The board is designed in ATX form-factor and employs high-quality semiconductor capacitors, load-proof fins and heat pipes, as well as triple goldish coverage. It is compatible with Intel Ivy/Sandy Bridge processors and LGA1155 socket.



The motherboard inventory embraces 32GB of two-channel DDR3 memory (4 DIMM), the nominal clock frequency of which equals to 1866 MHz; this index might be increased to 2133 MHz on overclocking activity. The board accommodates two PCI Express Gen2 x16 slots (for CrossFireX support and graphics card upgrade), two PCI Express Gen2 x1 and the same number of PCI slots for the connection of other cards. Besides, Z77H2-A5X Deluxe is notable for a good potential in mutual operation with …

The Introduction of Transparent Chassis from Scythe

Scythe has recently amazed the community by the introduction of absolutely transparent chassis. ACB-Type3 model preserves the cutout of the standard Mid-Tower chassis solutions, but is made of transparent acrylic plates. One more peculiarity of this model is the parallel to the base localization of motherboard. Besides, ACB-Type3 is compatible with motherboards of various form-factor, including mini-ITX, micro-ATX, and ATX.



The motherboard is accommodated on a special tray. Right under this tray the customers are able to find a set of bays designated for the installation of PSU, three 3.5-inch drives, a couple of 2.5-inch drives, and three 5.25-inch drives. The chassis is compatible with CPU coolers of up to 190 mm in height.


At the same time, this model goes without any fans or side panels; this attributes the model to Open-Air segment. The product can content itself with practically noiseless passive system.


Scythe ACB-Type3 is equipped with sufficient number of …

Kingston and Adata Come up with M.2 SSDs

Within the framework of Computex 2014 both Kingston and Adata are going to introduce their fresh SSD series of M.2 form-factor. In keeping with the manufacturers’ words, the products – SM2280S2 and SR1020NP — are differentiated by some spectacular performance. At present the companies provide only basic info about the drives, leaving their fans in suspense.



Kingston SM2280S3 is based on Phison PS3108 that supports SATA 6 Gb/sec interface only. It ensures 540 MB/sec and 514 MB/sec speed on sequential Read/Write operations. For sure, it’s not the performance innovative M.2 drives should demonstrate (about 10 Gb/sec), although the model considerably surpasses traditional HDDs in this respect.


This SSD series is represented by three models of 120 GB, 240 GB and 480 GB capacity. All of them employ DDR3 cache-memory with the minimal 256 MB capacity. Besides, the difference in efficiency between other M.2 offers Kingston promises to compensate by a more affordable price.
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.36
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 20 January 2012, 03:51
Last visit: 21 January 2012, 00:35