ECS Debuts with a New GTX660TIA-2GR5-WFM Graphics Card

ECS, a well-known designer of graphics solutions, announces the release of its new graphics card GeForce GTX 660 Ti, also known as GTX660TIA-2GR5-WFM. The card is elaborated on the basis of a reference adapter from Nvidia. GPU GK104 (designed according to 28 nm technological process) is the heart of the model. It consists of 1344 CUDA cores and features 915 MHz nominal frequency that can be dynamically overclocked to 980 MHz.



Memory subsystem of ECS GeForce GTX 660 Ti embraces 2 GB of GDDR5 memory that runs at the nominal 1502 MHz frequency but can be increased to the effective 6008 MHz mark. The manufacturer decided not to alter recommended by Nvidia parameters in their own version. The connection with GPU resources is realized via 192-bit rail.


This graphics card employs PCI-e 3.0 x16 internal interface. A set of external video interfaces totally corresponds to the etalon requirements and involves one DisplayPort, one HDMI, and a pair of DVI ports.


To continue, …

Company XFX is preparing Radeon HD 7970 GE with Double Dissipation cooler

American vendor XFX is about two weeks to release a Radeon 7970 Edition Double Dissipation (model code — FX-797G-TDF). It combines the capabilities of GPU Tahiti XT2 with a higher overclocking potential and the TDP, rather than at Tahiti XT, PCB reference design, but without a single phase power supply (6 +1), and the cooling system in the vaporizing chamber, an array of aluminum fins, PA plate (the same heatsink for the VRM and memory), as well as the two fans standard size 90 mm.



New model will get the recommended for the Radeon HD 7970 GE frequency ratio 1000/6000 MHz for core and chips GDDR5. The graphics chip will operate at 1050 MHz in the load. Recall that the “usual” HD 7970 was limited to regular frequencies 925/5500 MHz and did not support dynamic overclocking.


The configuration of video outputs is almost standard: from the five of DVI-I, DVI-D, HDMI and 2x Mini DisplayPort for some reason excluded DVI-D. The additional power is supplied by one 8-pin and one …

The Compulab IPC3 Mini-PC with Passive Cooling Goes for 693 USD

One of the latest products by Compulab is an IPC3 mini-PC, intended for industrial and commercial use. The lowest price of the basic model is 693 USD.



Outside dimensions of the framework are 160 х 190 х 40 mm. Due to its exterior construction the case provides overall passive cooling.


There’s a possibility to install 32 GB of RAM, a 2.5” storage drive, an M.2 2260 SSD and a couple of devices with an mSATA connector. The novelty features wireless interface adapters along with two USB 2.0, four USB 3.0, two Gigabit Ethernet, a DisplayPort 1.2, an HDMI 1.4a and an S/PDIF ports. However, special modules will be able to extend this set of connectors.


The Compulab IPC3 Mini-PC operates an Intel Kaby Lake CPU and is protected by the five-year manufacturer warranty.
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.36
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 12 March 2011, 00:35
Last visit: 12 March 2011, 00:57