Transcend Launches New mSATA and Half-Slim SATA SSD Solutions

Transcend, a renowned manufacturer of diverse data storage solutions, launches three new SSD models targeting industrial sector. Codenamed MSA740 and MSA630, the two models are developed in mSATA form-factor, while their companion, entitled HSD630, has got half-slim SATA format. In retail sale all three SSD lines are available in several capacity variations. Hence, MSA740 with SATA III 6Gb/sec interface goes with 32 GB, 64 GB and 128 GB capacities; at the same time, MSA630 and HSD630, featuring SATA II 3Gb/sec interface, go with 32 GB and 64 GB capacities only. All three SSD lines are characterized by a proven durability, stability of operation, and low power consumption, combined with an utmost efficiency.

SSD Transcend MSA740 features 29.85x50.8x4 mm dimensions and is equipped with a powerful controller that promotes for the highest speed showings. The maximal sequential Read/Write speed equals to 520/270 MB/sec correspondingly, while the maximal random Read speed (4KB blocks) …

Gigabyte Unleashes a Pair of Brix Mini-PCs for Skylake Platform

Gigabyte keeps on expanding the segment of mini-PCs with its proper Brix solutions. This time the lineup has been replenished with two models: Brix GB-BSCEA-3955 & Brix GB-BSCEHA-3955. The two differ from each other by the height of the case. The first new-comer features 119.4x112.6x34.4 mm dimensions, whereas its companion boasts 119.4x112.6x46.8 mm dimensions. The latter allows for the installation of an additional 2.5-inch drive of 7.0 or 9.5 mm height. Both models are targeting Intel Skylake platforms.

The other characteristics of these mini-PCs are identical. They are based on two-core Intel Celeron 3955U CPUs (14 nm) which operate at 2.0 GHz frequency. Processors cooperate closely with Intel HD Graphics 510 that runs at 300-900 MHz clock frequency. The motherboard PCB (110x105 mm) houses a couple of SO-DIMM slots for DDR4-2133 MHz RAM (up to 32 GB).

Both Brix solutions offer one slot for the installation of M.2 2280 drive and a sole M.2 expansion slot which is …

Evga Launches One More Overclocked Graphics Card

Evga, a leading American supplier of 3D cards, is going to launch one more graphics card with factory overclocked speeds. A new model is based on Nvidia FeForce GTX 670 adapter and codenamed as Evga GeForce GTX 670 FTW LE. Its design resembles the one implemented in GeForce GTX 670 FTW card, but the main distinction between them is seen in frequency showings. The newbie demonstrates a bit lower frequency index than its predecessor.

Evga GeForce GTX 670 FTW LE is housed on a PCB designed for PCI-e 3.0 x16 bus. This card takes GK104 graphics core with 1344 CUDA cores as the basis; it is developed on Kepler architecture under 28 nm standards. Its inventory also embraces 2GB of GDDR5 memory (256-bit interface). Cooling system is introduced by a 2-slot cooler of active type with a single turbine-like fan. Power subsystem consists of two connection 6-pin sockets and requires a quite efficient PSU (not less than 500W power).

Frequency template looks the following way: GPU runs at …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 08 July 2011, 17:39
Last visit: 08 July 2011, 17:39