Lian Li to Release a Space-Saving PC-Q33 Chassis

Lian Li, a well-known hardware manufacturer from Taiwan, is ready to marvel the audience by one more offbeat PC case: the PC-Q33. The model is developed in a space-saving mini-ITX standard with 229x328x240 mm dimensions. Despite frugal size, an overall case capacity equals to 29.2 liters. This chassis features a quite laconic design, although will be available in two coating variations: black and silver. The implementation of a lock on the frontal panel is thought to be the model’s basic peculiarity.

The PC-Q33 is consistent with mini-ITX and mini-DTX motherboards and supports the installation of 220 mm graphics cards, as well as 180 mm CPU coolers. At the same time, the maximal length of the power supply unit should not be more than 200 mm. Internal layout presupposes the mounting of three 2.5-inch drives and a couple of 3.5-inch drives.

PCI Expansion slots are available in the amount of two only. The frontal panel accommodates two high-speed USB ports (3.0 v) and 3.5 mm …

Enermax Unveils Staray Lite and Staray Silence Chassis

Enermax Technology Corporation, an established manufacturer of varied PC hardware and peripherals, has unveiled a pair of new chassis, codenamed Staray Lite and Staray Silence. Both products are elaborated in mid-tower form-factor (472x185x421 mm dimensions) and are predestined for those users who suppose quality and reliability a must. These chassis feature very similar external design but their internal layout differs a bit.

Models Lite and Staray are ready to house four external drives of 5.25-inch standard, five internal drives of 3.5-inch standard, and seven expansion slots. They support ATX/micro-ATX motherboards and can accommodate up to four 120 mm fans. Additionally, there is a possibility to install a liquid-cooling system, due to the availability of dedicated holes for cables on the rear facet.

Staray Lite is delivered with only one pre-installed 120 mm fan, located on the frontal panel. It can be supplemented by three more fans on the rear and side facets. I/O …

Plextor Prepares the Release of M5P SSD

Plextor is currently preparing a new SSD series, codenamed M5P. According to the forecasts, this series will be differentiated by high-performance characteristics and Serial ATA 3.0 interface. M5P will be represented by three models of 128 GB, 256 GB and 512 GB volume capacities. All the model lines are developed with the utilization of 19 nm technological process. In addition, all SSDs will be equipped with NAND flash-memory (MLC Toshiba) and Marvell 88SS9187 controllers.

Three models differ from one another by the flash-memory volume. Thereby, 128 GB models accommodates 256 MB of DDR3 cache-memory, 256 GB model – 512 MB, and the last one, 512 GB model – 768 MB. Those SSDs support SATA 6 Gb/sec.

The manufacturer claim that the maximal consecutive reading and writing speeds will achieve 540 Mb/sec and 340 Mb/sec correspondingly (with 128 GB model); 256 GB and 512 GB models will achieve 540 Mb/sec in reading and 450 Mb/sec in writing mode. At the same time, M5P series …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 23 August 2012, 02:24
Last visit: 23 August 2012, 02:48