NZXT Rolls Out a New Chassis Phantom 630 Windowed Edition

NZXT has proudly announced the release of its newest PC chassis, codenamed Phantom 630 Windowed Edition. Being a modified version of Phantom 630 model, the ‘greenhorn’ is developed in ultra-tower form-factor, featuring a side-panel window. The case supports quite large motherboards (ATX, EATX, XL-ATX, and micro-ATX) and offers nine expansion slots.

Despite visual discrepancy with the original model, Windowed Edition preserved some of its basic features. Therefore, it allows for the integration of four 5.25-inch drives and eight 3.5/2.5-inch ones. The latter are installed into modular bays which can be removed if necessary. The chassis is ready to accept CPU coolers of 200 mm in height and long graphics adapters (up to 325 mm in length). In case the user decides to remove the internal drive bays, it will become possible to employ much longer adapters, up to 507 mm!

The other peculiarity of Phantom 630 Windowed Edition is the feasibility to incorporate two 2.5-inch …

Company XFX is preparing Radeon HD 7970 GE with Double Dissipation cooler

American vendor XFX is about two weeks to release a Radeon 7970 Edition Double Dissipation (model code — FX-797G-TDF). It combines the capabilities of GPU Tahiti XT2 with a higher overclocking potential and the TDP, rather than at Tahiti XT, PCB reference design, but without a single phase power supply (6 +1), and the cooling system in the vaporizing chamber, an array of aluminum fins, PA plate (the same heatsink for the VRM and memory), as well as the two fans standard size 90 mm.

New model will get the recommended for the Radeon HD 7970 GE frequency ratio 1000/6000 MHz for core and chips GDDR5. The graphics chip will operate at 1050 MHz in the load. Recall that the “usual” HD 7970 was limited to regular frequencies 925/5500 MHz and did not support dynamic overclocking.

The configuration of video outputs is almost standard: from the five of DVI-I, DVI-D, HDMI and 2x Mini DisplayPort for some reason excluded DVI-D. The additional power is supplied by one 8-pin and one …

Aresze Announces Chassis with Noiseless Cooling System

Enthusiasts and gamers might sigh with relief after their prolonged attempts to find the chassis for the creation of high-performance gaming systems. Aresze is going to release chassis, codenamed Seediq 8003, of new generation which is a perfect match for high-end gaming systems with unique cooling facilities. The chassis is developed in midi-tower form factor and features 520x215x508 mm dimensions. The casing is made of steel alloy, and is ready to accommodate motherboards of micro-ATX and ATX standards.

Despite the average dimensions, Aresze Seediq 8003 is compatible with CPU fans of 175 mm in height, large graphics adapters of up to 300 mm in length with HDD bays and up to 430 mm – without HDD bays, as well as, power supply units of ATX/EPS standard. This chassis has got quite efficient internal layout. Hence, it's equipped with ten sections for drives (four external 5.25 inch drives and six internal 2.5- 3.5 inch drives) and eight PCI slots for four graphics adapters.
… …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 03 November 2012, 14:44
Last visit: 27 April 2014, 16:42