Deepcool is preparing a new cooler with heat pipes

Deepcool production company of inexpensive and quite efficient cooling systems has provided a sample of CPU cooler — Big Frost (tentative codename), which is an extension of current Frostwin model. Previous model has 4 sintered powder heatpipes, which conduct heat from the processor to protect it from overheating. Also, like a new model, it has 120mm fans.



New model has a simple design, but strict, almost «standard», forms will not prevent it from showing a decent performance. It works with less noise and performs an effective cooling. Big Frost consists of a nickel-plated copper base with a miniature auxiliary radiator, six U-shaped copper heatpipes, each of 6 mm in diameter, and two sections of aluminium plates of similar thickness. Pre-installed fans are running at different speeds. One turns with intensity of 1300 r / min (22.6 dB noise), the other — in the range from 900 to 1500 rev / min (21,4-32,1 dB).


Dimensions of construction form 126x136x159 mm, weight — …

The Release of Two 3D Graphics Cards from Sparkle Computer

Sparkle Computer, a Taiwanese supplier of graphics solutions and consumer electronics, has released two 3D graphics cards simultaneously. The two models have been codenamed Calibre X680 Captain and Calibre X670 Captain. Both cards are based on Nvidia GK104 GPUs developed under 28 nm standards. The chief peculiarity of the products is the integration of extraordinary cooler CoolPro; the uncommonness is seen in the localization of three fans that found their places under the radiator. This radiator is connected with the base, which is in direct touch with GPU, by means of six heat pipes.



Calibre X680 Captain and Calibre X670 Captain are equipped with DisplayPort, DVI, DVI-D, and HDMI video outputs. Graphics cards employ PCI Express 3.0 interface and support DirextX 11 interface, as well as, such Nvidia technologies as CUDA, PhysX, 3D Vision, and 3D Vision Surround. They are also notable for the availability of eight-phase voltage regulators and the enhanced depth of ground on the …

The new version of the chassis from Zalman Z9 Plus

The company Zalman continues to utilize the design of the whole successful chassis Z9, releasing a new model Z9 Plus D4-U3. Perhaps, the only difference from the recent Z9 U3 is the lower part of the front panel, made in the form of letter D.



The list of applied characteristics has remained the same. The body is made of steel and plastic in the form factor Mid-Tower. Its dimensions are 504 (L) x 207 (W) x 464 (H) mm, weight — a little over 7 lbs. Inside can be placed the motherboard ATX or microATX, seven cards PCI-E expansion up to 290 mm, ATX-compatible power supply, three optical drives, and seven hard drives, including two SSD 2.5 format.


The set includes two 120-mm fan — in front with the LED-backlit display and on the back without it. On the input-output is a small information display, two USB 3.0 ports and USB 2.0, Mini-Jack connectors for headphones and microphone.


Zalman Z9 Plus D4-U3 will debut in Japan and perhaps in some other markets, August 19 at a …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 02 October 2012, 21:39
Last visit: 02 October 2012, 21:39