Shuttle to Introduce a Small-Sized Budgetary Nettop DS47

Shuttle, an outstanding Taiwanese mini-PC and barebone-systems developer, is going to introduce its new nettop model DS47. The presentation will be realized within the boundaries of Computex 2013 exhibition which will take place in early June. According to the preliminary information, the product features 200x39.5x165 mm dimensions and weighs 2.05 kg.

Shuttle DS47 is based on Intel Celeron 847 processor, running at 1.1 GHz, and comes with an integrated Intel HD2000 graphics. CPU TDP level equals to 17 W. This model accommodates 16 GB RAM (SO-DIMM) of DDR3-1333 MHz type. Its internal layout is estimated for the incorporation of a single 3.5-inch HDD or a pair of 2.5-inch HDD/SSD with the support of SATA 6 Gb/sec interface.

The availability of mini-PCI Express connector with the support of mSATA interface gives the user a chance to expand the system with one more solid-state drive. In addition, Shuttle equips this nettop with a half-size mini-PCIe connector for the …

SilverStone Comes Out with Precision PS12 Chassis

The lineup of tower cases developed by SilverStone has been replenished by a new price-efficient solution, entitled Precision PS12. The model features 405x360x170 mm dimensions and is ready to accommodate small-sized motherboards (mini-ITX, micro-ATX) as well as four expansion cards. The chassis is made of high-quality plastic, supplemented by a fine-meshed metallic grid on the front panel.

Inside, there is a single rack for the installation of optical drives; it’s estimated for two 5.25-inch units. There is also space for 4x 3.5-inch drives and 1x 2.5-inch drive. Hence, there is little space for graphics adapters, the length of which should not exceed 358 mm. The layout is intended for 140-mm high CPU coolers & standard ATX PS/2 power supply units.

SilverStone Precision PS12 is shipped with a single preinstalled 120-mm fan (front panel). Additionally, it’s possible to include one 80-mm fan (front panel) and one 80-/92-mm fan (rear panel). Pricing is set at $45.

Preview of video-card Club 3D Radeon HD 7970 royalAce

Club 3D has released fifth model of the Radeon HD 7970 — with the prefix royalAce in the codename. Before «ace» there were represented “the king” HD 7970 royalKing and “Queen” HD 7970 royalQueen. New model works at higher frequencies, and supports dynamic overclocking. Into the configuration of Club 3D Radeon HD 7970 royalAce inserted 2048 stream processors. Nominal of core is 1050 MHz in normal mode and 1100 MHz in 3D-games. GDDR5 memory chips make total of 3 GB and operating at 6 GHz, the memory bus is 384 bits.

Club 3D Radeon HD 7970 is notable by its effective use of a proprietary cooling system. It is equipped with a dual-slot cooling system royalAce consisting of at least three copper heat pipes, an array of aluminum fins and a pair of fan size 80 mm. According to the manufacturer reports, the construction is very quiet (31.5 dB in the normal mode of operation, 38 dB — under load), and secondly, provides a nice temperature (average during the game GPU …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 20 November 2011, 09:42
Last visit: 20 November 2011, 09:42