EKWB Launches a New Water Block for GV-N680SO-2GD

Early August of 2012 was marked for Gigabyte by the release of its one more graphics card, codenamed GeForce GTX 680 SOC (GV-N680SO-2GD). This card can boast the availability of high factory frequencies and quite mighty cooling system. The nominal frequencies have been heightened to 1137MHz, 1202MHz, and 6200MHz for memory. Such outstanding characteristics required the integration of a high-quality and high-performance cooling system which consisted of five(!) fans. This made the card rather voluminous, cumbersome and noisy. That was when EKWB decided to design a dedicated water block to be employed with this remarkable graphics adapter.



Water block EK-FC 680 GTX SOC is housed on a copper base, good-quality acetal cover, and rubber shims as a compressor. The model is delivered with pre-installed fixing stands to facilitate the installation. It should be noted that this water block entirely covers the frontal part of the graphics card, along with the adjacent RAM modules and …

System on Module Sauris AM3517/05 Sales Start

The official website of Sauris company is dazzled by the information about the sales start of the systems on modules AM3517/05. The new systems are based on high-performance microprocessors TI Sitara AM3517 or AM3505 developed in the SODIMM-204 form-factor. System designers have extended the data bus to 16 bit and connected it with the flash-memory chip. The extension of data bus allowed for the acceleration of the OS loading. In addition, the systems are equipped with a new keyboard controller that enables the connection of up to 80 keys; the integration of such solution permitted the designers to refuse from the additional elements of keyboard protection from electrostatic restrictions.



The module configuration includes memory of EEPROM type in 64 KB volume capacity, SDRAM DDR2-166 memory in 256 MB capacity, and flash-memory of NAND type in 256 MB capacity. The interface list boasts a number of facilities including Ethernet 10/100 Mb/sec, CAN 2.0b, USBx2, LVDS, McSPI, McBSP, …

Here Comes the 2nd Generation of Enermax Revolution X’t PSUs

Following the success of Revolution X’t series of power supply units, Enermax has introduced the second generation of revolutionary solutions: the Revolution X’T II. The series counts four models of 160x150x86 mm dimensions, each complying with 80Plus Gold certificate (up to 92% efficiency level). All the new-comers are able to operate in a wide voltage range (100-240 V) to meet the requirements of different PC platforms.



Enermax Revolution X’t II units come equipped with a single +12V rail with high output capability, high-end Japanese electrolytic capacitors, DC-to-DC converters as well as other reliable hardware. The chassis is cooled down by 139-mm fan, based on patented Twister bearing; consequently, the fan is estimated for 160.000 hours of fail-safe activity.


In order to reduce the end price of the models, Enermax has implemented hybrid cabling: key cables are connected to the chassis, while accessory cables might be detached when unnecessary. The units …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.36
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 03 April 2012, 16:24
Last visit: 03 April 2012, 16:47