First SSDs from Asus to be Released Already in May

First seen at CES 2013 exhibition, Asus ROG RAIDR solid-state drives are on their final stage of development before an official release in May. Unlike the majority of contemporary SSD solutions in the market, the product from Asus features quite distinct form-factor, similar to expansion cards. The new drive is known to employ PCI Express 2.0 x2 interface with the support of x16/x8/x4 slots.



According to the preliminary data, ROG RAIDR solid-state drives will be available in two capacity variations – 120 GB and 240 GB. Both models will run under a couple of SandForce SF2281 controllers, comprised into RAID 0 array. MLC NAND flash-memory chips from Toshiba (designed under 19 nm technological process) will be the heart of revolutionary SSDs. Irrespective of the overall differentiation, ROG RAIDR will support a range of technologies traditional SSDs support, including S.M.A.R.T., TRIM and NCQ.


With the respect to the performance, both drives will be able to demonstrate …

Low-Profile SilverStone Argon AR06 Cooler Review

Each manufacturer which deals with CPU coolers tries to enrich its portfolio with products of various segments. SilverStone has gone ahead in this aspect, offering as entry-level so top-notch coolers. The AR06, a representative of Argon Series, is a low-profile model targeting entry-level and mainstream PC systems. Why giving preference exactly to this model? Let’s find it out.



Highlights


SilverStone AR06 features the following specifications:

— type: air cooler with active airflow;

— compatibility with motherboards: Socket Intel LGA115x, Socket AMD FM1, FM2, AM2, AM3;

— cooling performance: 95 W TDP;

— fan specs: dimensions: 92x92x15 mm, voltage – 12 V, rotational speed – 1200-2500 RPM, airflow – 68.3 m3/h, noise level – 20-28.3 dBA, bearing type – rifle, MTBF – 40.000 hours;

— heatsink specs: dimensions: 58x105x92 mm; weight – 263 mm, aluminum fins, 4x copper heatpipes, direct CPU contact;

— power supply: 4-pin connector;

Release of Security Acceleration Module from Check Point

Check Point representatives have announced the release of their new creation Security Acceleration module. This module has been developed with the heightened security in mind, and according to the up-to-date hardware acceleration methodology with the consideration of the requirements stipulated by the high-performance environment.



Check Point is notable for the design of an advanced SecurityCore hardware-based technology which stimulated the development of a module with the firewall bandwidth of 110 Gbit/sec. At the same time, the latency level doesn’t exceed the margin of 5 microseconds. This technology employs parallel computing capabilities used for the process acceleration and safety. The module is equipped with 108 cores which allow the central processor to swap-out and transfer the vast majority of operations connected with the security issues to the Security Acceleration module. In its turn, this provides for the better safety options in network environment.

AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.38
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 20 November 2011, 19:41
Last visit: 13 February 2012, 21:42