The Introduction of Transparent Chassis from Scythe

Scythe has recently amazed the community by the introduction of absolutely transparent chassis. ACB-Type3 model preserves the cutout of the standard Mid-Tower chassis solutions, but is made of transparent acrylic plates. One more peculiarity of this model is the parallel to the base localization of motherboard. Besides, ACB-Type3 is compatible with motherboards of various form-factor, including mini-ITX, micro-ATX, and ATX.

The motherboard is accommodated on a special tray. Right under this tray the customers are able to find a set of bays designated for the installation of PSU, three 3.5-inch drives, a couple of 2.5-inch drives, and three 5.25-inch drives. The chassis is compatible with CPU coolers of up to 190 mm in height.

At the same time, this model goes without any fans or side panels; this attributes the model to Open-Air segment. The product can content itself with practically noiseless passive system.

Scythe ACB-Type3 is equipped with sufficient number of …

Corsair Launches a New 80Plus Gold Series of PSUs

Corsair is to start selling its newest series of power supply units, entitled Corsair CS. The series embraces four models of 450W, 550W, 650W, and 750W power, which feature some outstanding 92% efficiency. Small wonder that such models have already won 80Plus Gold certificates that verify their high-end membership. All the units correspond to the ATX specifications and support the latest Intel’s and AMD’s platforms. Besides, CS series is differentiated by a power-saving design combined with a tolerant price.

Corsair CS units are equipped with a semi-modular cable system. Main 24-contact ATX power and 8-contact EPS motherboard cables have got a static fixture, whereas flat modular cables come in the delivery set and are predestined to power HDD/SSD, graphics cards, fans, etc. Cooling is provided by 120 mm fan, based on a slide bearing; it runs at low speeds on standard loads, producing little noise during routine tasks. Its estimated MTBF equals to 150.000 hours.

All …

QNAP to Come up with TS-x51 NAS Series

QNAP, a well-known designer of network and CCTV monitoring solutions, is glad to come up with a new series of NAS devices – the TS-x51. The series is currently introduced by two models with two and four drive sections. They are intended to operate under the base of Microsoft Hyper-V, Windows Server 2012, VMware VSphere, Citrix XENServer platforms. Both new-comers are housed in stylish white enclosures that match either home or corporate environment.

The TS-x51 storages are based on Intel processor with 2.4GHz clock frequency. It is accompanied by 1 GB RAM (DDR3L), 7.1-channel audio controller, and Wi-Fi 802.11ac adapter via an independent USB key. These NAS support the installation of SSD/HDD/SSHD drives of 3.5-inch form-factor with SATA III 6 Gb/sec interface. The frontal panel accommodates activity indicators, Power and Reset buttons, as well as a single USB 3.0 port.

To continue, both versions of storages offer imagery-data recording options and support virtual …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 09 September 2012, 17:25
Last visit: 09 September 2012, 17:49