Fractal Design Define R5: Silent Chassis for Ambitious Systems

Fractal Design has recently added a new R5 model to its renowned Define series. The new-comer is targeting enthusiasts longing for high performance combined with silent operation. It is represented in two chassis modifications — with an acrylic side window ($119.99) and with a blind side panel ($109.99) – as well as in three color versions: white, black, and titanium. The case is ready to accommodate motherboards of nearly all formats (mini-ITX, micro-ATX, ATX) with the maximum of 7 expansion slots.



Featuring 531x462x232 mm dimensions, Fractal Design Define R5 offers a pair of 5.25-inch drive bays, eight 3.5-inch drive bays, and two 2.5-inch drive bays. Herein, if necessary, all of them might be removed to allow for the installation of long graphics cards (up to 310 mm), of high CPU coolers (up to 180 mm), and of varied heatspreaders. Besides, due to a well-elaborated framework, the drives can be fixed and removed without any tools.


To continue, this chassis boasts the …

SilverStone Replenishes Its Nitrogon Series with Two Coolers

SilverStone, a Taiwanese manufacturer of high-end cooling solutions, has recently launched two new coolers codenamed NT01-PRO and NT06-PRO. Both models replenish the Nitrogon series and distinguish themselves by utmost compatibility. Hence, this couple is able to cool down practically all CPU systems developed by AMD and Intel, due to the support of sockets AM2, AM3, FM1, FM2 (AMD) and LGA775, 1155, 1156, 1366, and 2011 (Intel).



Coolers NT01-PRO and NT06-PRO consist of a copper-nickeled base, six heat pipes (6 mm each) and single-section aluminum heatsink. The first model NT01-PRO is delivered without nominal fans and features 140x97x120 mm dimensions. The customer gets the right to decide which fans, 70 mm or 80 mm, will provide more cooling effect to CPU. This cooler will benefit the most if integrated on the rear or top panel of PC chassis.


The second model NT06-PRO features 140x82x139 mm and is delivered with a single 120 mm fan. Its rotational speed is monitored by …

The New Fan from Antec – Rainbow 120 RGB – Will Be Available at the Price of 15 EUR

The range of Antec chassis fans has been widened by the Rainbow 120 RGB model. Its name suggests, that this product is of 120 mm typical size. LED backlighting of Rainbow 120 RGB renders up to 256 shades to produce dynamic effects or covers up to seven colours in the static mode. Moreover, the setup chosen by the user is supported after the PC switching off. The backlighting is adjusted just by pushing a little button.



The special blade configuration directs air flow to the outer side, thus increasing the static pressure level and enhancing the process of flows distribution inside the system unit. Fluid bearings extend the service life, and fan rubber pads at the places of mounting holes lower the vibration and noise level.


The top rotational speed of Rainbow 120 RGB is 1,200 rpm, and the air flow capacity equals to 1.2 m3/min. This device possesses a three-pin power supply connector and features the 12 V nominal voltage. The noise factor is not higher than 24.8 dBA.

AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.36
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 30 June 2011, 17:30
Last visit: 07 December 2012, 16:12