Fractal Design has announced Define R4 hull

In nearly two years after the announcement of the hull Define R3, Fractal Design Company announced the release of its ideological successor. New, executed in the same minimalist style, has received the designation Define R4.

The hull is designed to install motherboard sizes ATX, Micro ATX and Mini ATX, and eight expansion cards. Define R4 design provides for two external 5.25-inch bay size, as well as ten internal, eight — to set the size 3.5-inch HDD, two — for the installation of SSD size 2.5 inches.

As the creators say, inside Define R4 can be used CPU coolers up to 170 cm, power supplies up to 270 cm, and graphics up to 295 or 430 mm (respectively, with basket for the HDD, and without it). As for the cooling system, it involves the installation of up to seven fans: two front, one rear, two top, one bottom and one side. The package includes two fans Silent Series R2, front and rear. Both are characterized by a diameter of 140 mm and speed 1000 r / min. Interestingly, …

Company XFX is preparing Radeon HD 7970 GE with Double Dissipation cooler

American vendor XFX is about two weeks to release a Radeon 7970 Edition Double Dissipation (model code — FX-797G-TDF). It combines the capabilities of GPU Tahiti XT2 with a higher overclocking potential and the TDP, rather than at Tahiti XT, PCB reference design, but without a single phase power supply (6 +1), and the cooling system in the vaporizing chamber, an array of aluminum fins, PA plate (the same heatsink for the VRM and memory), as well as the two fans standard size 90 mm.

New model will get the recommended for the Radeon HD 7970 GE frequency ratio 1000/6000 MHz for core and chips GDDR5. The graphics chip will operate at 1050 MHz in the load. Recall that the “usual” HD 7970 was limited to regular frequencies 925/5500 MHz and did not support dynamic overclocking.

The configuration of video outputs is almost standard: from the five of DVI-I, DVI-D, HDMI and 2x Mini DisplayPort for some reason excluded DVI-D. The additional power is supplied by one 8-pin and one …

MSI Releases an Affordable Motherboard of Micro-ATX Form-Factor

Right after the release of FM2-A75MA-P33 motherboard, MSI has taken a decision to design one more model for AMD Trinity platform. Codenamed MSI FM2-A85XMA-E35, a new model is based on a more efficient chipset – AMD A85X. This motherboard is a typical representative of entry-level solutions, though can boast a number of attractive facilities.

MSI FM2-A85XMA-E35 is developed in micro-ATX form-factor for Socket FM2 CPU sockets. The model is known to support AMD A and Athlon II processors. This board accommodates two DIMM slots for the installation of DDR3 memory modules, the overall volume of which can rise up to 32GB. The supported memory operating frequencies might vary: DDR3-1066 MHz, 1333MHz, 1600 MHz, 1866 MHz, and 2133 MHz. Power subsystem features a rather unpretentious framework and consists of five phases; thus, this model isn't intended for overclocking purposes.

Expansion facilities implemented in MSI FM2-A85XMA-E35 can be found in any other entry-level …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 31 August 2012, 09:20
Last visit: 31 August 2012, 18:34