Plextor Prepares the Release of M5P SSD

Plextor is currently preparing a new SSD series, codenamed M5P. According to the forecasts, this series will be differentiated by high-performance characteristics and Serial ATA 3.0 interface. M5P will be represented by three models of 128 GB, 256 GB and 512 GB volume capacities. All the model lines are developed with the utilization of 19 nm technological process. In addition, all SSDs will be equipped with NAND flash-memory (MLC Toshiba) and Marvell 88SS9187 controllers.



Three models differ from one another by the flash-memory volume. Thereby, 128 GB models accommodates 256 MB of DDR3 cache-memory, 256 GB model – 512 MB, and the last one, 512 GB model – 768 MB. Those SSDs support SATA 6 Gb/sec.


The manufacturer claim that the maximal consecutive reading and writing speeds will achieve 540 Mb/sec and 340 Mb/sec correspondingly (with 128 GB model); 256 GB and 512 GB models will achieve 540 Mb/sec in reading and 450 Mb/sec in writing mode. At the same time, M5P series …

Graphics Card Zotac GTX 650 Ti AMP! Edition Review

The demand for a separate graphics solution relies greatly on its performance in correlation to its price. High-end cards usually go at high price, but still it's feasible to detect a model that would also be acceptable in cost. Zotac has recently released, as claimed by the manufacturer, the most powerful graphics card in the series. Codenamed Zotac GTX 650 Ti AMP! Edition, it is delivered with the factorial overclocking parameters. This signifies that the card operates at heightened frequencies from the very beginning. Moreover, this product is ready to gladden the potential audience with an affordable price in combination with an utmost performance.



PCB Design and Delivery


Following the general tendencies, Zotac implemented its singular facilities in the design of a printed circuit board. Microcircuit chips are soldered on both sides of the board; this implies that graphics card Zotac GTX 650 Ti AMP! Edition houses 2GB memory with 128-bit bus interface. The chips are …

Platinum PSU FSP Aurum 92+ 650W Review

Up-to-date power supply units are able to achieve 80-90% efficiency due to 80 Plus standard. The integration of this standard provides for better power-saving facilities, heat level and noise level. Still, some customers give preference to performance rather than energy saving; thus PSUs from FSP will become the most wise solution for such people. Last year FSP introduced Aurum series and today the company expands the line with a new model — Aurum 92+. The model is represented so far with a single power variation – 650W, and corresponds to 80 Plus Platinum requirements.



General Peculiarities


Correspondence to Platinum standards implies that FSP Aurum 92+ unit should demonstrate not less than 91% nominal efficiency, 90% efficiency at 20 percent loading, and 94% efficiency at 50 percent loading. Testing results prove the claimed characteristics, making this model a desirable high-end acquirement. Aurum 92+ is delivered in a standard cardbox that contains FSP logo …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.36
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 22 March 2011, 23:36
Last visit: 26 March 2011, 14:28