Corsair Expands its Dominator Platinum DDR3 Memory Kit Series

Corsair, an American supplier of RAM memory and SSD solutions, is mapping out the forthcoming release of three new DDR3 memory kits. All three kits will be delivered within the confines of Dominator Platinum series: CMD8GX3M2A2400C10, CMD32GX3M4A2400C10 and CMD32GX3M4A1866C9 models. The kits will be delivered with a lifetime warranty.



Memory modules, included in these kits, are equipped with DHX aluminum heatsinks and improved cooling technology, feature 56 mm height, and support Intel XMP overclocking profiles. Their optimal operational frequency is estimated at 1866 MHz and 2400 MHz.


Corsair CMD8GX3M2A2400C10 kit consists of two 4GB DDR3 modules (8GB overall capacity) and feature 1.65V nominal voltage index. The timings for the kit are shown as 10-12-12-31. Its framework accommodates white LED bar.


Four-channel Corsair CMD32GX3M4A2400C10 kit operates at 2400 MHz frequency. Its overall capacity equals to 32GB, while all other specifications are similar to the 8GB …

ASRock Teases Small-Sized X99M Killer Motherboard

Fans of small-sized PC systems might take delight in all the possibilities offered by Intel X99 chipset that is targeting innovative Intel Core i7 (Haswell-E generation) processors. Originally, the couple has been predestined for Socket LGA2011-3 platform full-fledged ATX motherboards. Nonetheless, ASRock is the one to equal all users by launching micro-ATX X99M Killer motherboard. In keeping with the manufacturer, the board’s functional does not yield to its senior companions.



ASRock X99M Killer accommodates four DIMM-slots for DDR4 memory modules, three PCI-e 3.0 x16 slots, ten SATA III 6 Gb/sec ports, a single Ultra M.2 port that employs four lines of PCI 3.0 bus. The major peculiarity ascribed to this model is the availability of two network controllers: Qualcomm Atheros Killer E2200 and Intel’s gigabit Ethernet proprietary version.


To continue, audio subsystem is developed according to Purity Sound 2 design standards, ensuring 7.1-channel sound production. External …

ID-Cooling Hunter Duet II Liquid Cooling System

ID-Cooling, being famous for its cooling systems, has released a Hunter Duet II cooler of large dimensions, which is supposed to transfer heat from the CPU and the graphics engine surfaces. This model is designed with a 360 mm heat sink, which is of great benefit to its efficiency factor.



The construction includes two water units with a base out of copper and built-in pumps, pipes in braided cable, the three-section aluminum 395 × 120 × 27 mm heat sink, three 120 mm fans, and an extraordinary framework with a 90 mm fan to blow over graphics card load-bearing elements and intensive plates for the CPU and GPU.


Though possessing similar construction, water units differ in lids design and the location of holes for liquid flow. At the moment their inner structure details are not available.

A compact fan to blow over VRM consumes 1.2 W. Its rotary speed is not higher than 1,500 rpm. The same ratio of each of the three main fans is not supposed to exceed 1,500–2,000 rpm.

AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.41
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 08 November 2012, 08:48
Last visit: 08 November 2012, 09:13