The Introduction of Transparent Chassis from Scythe

Scythe has recently amazed the community by the introduction of absolutely transparent chassis. ACB-Type3 model preserves the cutout of the standard Mid-Tower chassis solutions, but is made of transparent acrylic plates. One more peculiarity of this model is the parallel to the base localization of motherboard. Besides, ACB-Type3 is compatible with motherboards of various form-factor, including mini-ITX, micro-ATX, and ATX.

The motherboard is accommodated on a special tray. Right under this tray the customers are able to find a set of bays designated for the installation of PSU, three 3.5-inch drives, a couple of 2.5-inch drives, and three 5.25-inch drives. The chassis is compatible with CPU coolers of up to 190 mm in height.

At the same time, this model goes without any fans or side panels; this attributes the model to Open-Air segment. The product can content itself with practically noiseless passive system.

Scythe ACB-Type3 is equipped with sufficient number of …

SilverStone Replenishes Its Nitrogon Series with Two Coolers

SilverStone, a Taiwanese manufacturer of high-end cooling solutions, has recently launched two new coolers codenamed NT01-PRO and NT06-PRO. Both models replenish the Nitrogon series and distinguish themselves by utmost compatibility. Hence, this couple is able to cool down practically all CPU systems developed by AMD and Intel, due to the support of sockets AM2, AM3, FM1, FM2 (AMD) and LGA775, 1155, 1156, 1366, and 2011 (Intel).

Coolers NT01-PRO and NT06-PRO consist of a copper-nickeled base, six heat pipes (6 mm each) and single-section aluminum heatsink. The first model NT01-PRO is delivered without nominal fans and features 140x97x120 mm dimensions. The customer gets the right to decide which fans, 70 mm or 80 mm, will provide more cooling effect to CPU. This cooler will benefit the most if integrated on the rear or top panel of PC chassis.

The second model NT06-PRO features 140x82x139 mm and is delivered with a single 120 mm fan. Its rotational speed is monitored by …

Toshiba Introduces OCZ VT180 & TR150 2.5-Inch SSDs

As part of the Computex 2016, Toshiba introduced a couple of OCZ-branded 2.5-inch SATA solid-state drives. The OCZ VT180 & the OCZ TR150 are available in four capacities: 120 GB, 240 GB, 480 GB & 960 GB. The key differentiation between the two models lies in the choice of memory type; the first SSD employs MLC NAND chips, whereas the second item uses TLC NAND chips. The pair also differs by warranty liabilities, offering 5- and 3-year’s limited packages correspondingly.

Toshiba OCZ VT180 employs SATA III interface, featuring 100.45x69.75x7 mm dimensions. Its sequential Read/Write data transfer speed makes up 550/440 MBs across the line. At the same time, random Read/Write specs vary from 85.000-95.000 IOPS/90.000 IOPS respectively. The drive consumes 3.7 W power in active mode, reducing this level to 0.89 W in standby mode.

This model is estimated for 1.500.000 hours of fool-proof operation. Moreover, it supports such advanced technologies as SMART, TRIM and Idle Time …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 28 September 2012, 20:36
Last visit: 28 September 2012, 20:47