EVGA GeForce GTX 660 Ti

Due to the unknown paparazzi the photos of the upcoming graphics card EVGA GeForce GTX 660 T leaked to the Internet. As it can be seen it is made almost on the reference design of Nvidia. The main differences of EVGA board from the reference — design of the casing of the cooling system, the logo on the fan housing and the clock frequency.

The video card is made on the printed circuit board on the PCI Express 3.0 x16 bus and is equipped with a proprietary dual-slot cooler of active type. Its «heart» is created on 28-nm chip with 1344 GK104 CUDA cores and advanced architecture Kepler. On board there is a 2048 MB of GDDR5 memory with 192-bit and a frequency of 6008 MHz. In fact, core graphics core frequency is 980 MHz, and accelerated by the NVIDIA GPU Boost function value is equal to 1023 MHz.

Dimensions of the cooler are the same as the GeForce GTX 670, but the circuit board is expected to be shorter. It is believed that the card uses the GPU GK104-325-A2 analogically to …

HIS submitted a non-reference card Radeon HD 7970 X

Hightech Information System Company has completed the development of its secret weapon — the video card HIS 7970 X. The relatively modest-looking product, according to producer’s statement, is equipped with a (18 +1 +1)-channel power supply system, high-performance cooler IceQ X2 and non-standard set of ports — four Mini DisplayPort, single DVI and HDMI. The technology AMD Eyefinity 6 is supported — simultaneous work with six monitors. Clock frequency speeds up model 1000/6000 MHz for core and memory respectively. Hong Kong vendor assigns a novelty to a class of graphics cards Radeon HD 7970 GHz Edition.

The cooler is composed by a copper base, three 6-mm and two 8-mm heat pipes, ribs (cooler chips on the VRM and RAM), an aluminum radiator. A pair of 90-mm fan cool the core of Tahiti XT (2048 shaders, 384-bit memory bus) which combines with 3072 MB of memory GDDR5. Additional power is provided by two 8-pin connectors PCI-E Power, in addition memory individually powered …

SilverStone Comes Out with Precision PS12 Chassis

The lineup of tower cases developed by SilverStone has been replenished by a new price-efficient solution, entitled Precision PS12. The model features 405x360x170 mm dimensions and is ready to accommodate small-sized motherboards (mini-ITX, micro-ATX) as well as four expansion cards. The chassis is made of high-quality plastic, supplemented by a fine-meshed metallic grid on the front panel.

Inside, there is a single rack for the installation of optical drives; it’s estimated for two 5.25-inch units. There is also space for 4x 3.5-inch drives and 1x 2.5-inch drive. Hence, there is little space for graphics adapters, the length of which should not exceed 358 mm. The layout is intended for 140-mm high CPU coolers & standard ATX PS/2 power supply units.

SilverStone Precision PS12 is shipped with a single preinstalled 120-mm fan (front panel). Additionally, it’s possible to include one 80-mm fan (front panel) and one 80-/92-mm fan (rear panel). Pricing is set at $45.
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Gender: Female
Registered at: 09 April 2011, 23:55
Last visit: 06 February 2013, 22:37