Scythe SCIOR-1000: a Comprehensive CPU Cooler with Top-Flow Design

Scythe is going to start the sales of its newest CPU cooler, entitled SCIOR-1000. It is honored for a comprehensive nature, since it might work with all contemporary CPUs, except for Intel Socket LGA2011 models. The other remarkable thing ascribed to the product is the employment of Top-Flow design.

Therein, the fan is localized over the heatsink, directing the airflow towards the whole framework, including the nickel-plated base. This way, it promotes for a better cooling effect.

Scythe SCIOR-1000 embraces also three 6 mm heat-pipes, along with a 100 mm fan. The latter supports PWM technology, so is able to reach the speed of 1800 RPM. The maximal noise level achieves 26.7 dB. Release date is scheduled for the final days of 2013. Some other specifications about the cooler are described below:

— framework dimensions: 136x117x107 mm, weight – 400 g.;

— supported platforms: Intel – LGA1366/115x/775 and AMD – FM1/FM2/AM2/AM2+/AM3/AM3+;

— heat-pipes: …

They Did It! Official Release of AMD Radeon HD 7990 ‘Malta’

Much rumored reference graphics adapter from AMD has been recently officially introduced. As it was suggested before, Radeon HD 7990, codenamed ‘Malta’, employs two Tahiti XT2 GPUs, each of which contains 128 TMUs, 32 rasterization blocks (ROPs), and 2048 current processors (GCN architecture). Smooth work of both graphics cores is synchronized by means of PLX PEX8747 controller that supports 48 lines of PCI Express 3.0. Nominal clock frequencies ascribed to GPUs operation equal to 950 MHz, but Turbo mode enables the increase of frequencies up to 1000 MHz.

Video memory is represented by GDDR5 memory modules, the overall capacity of which equals to 6 GB (3 GB per each graphics core). Memory modules utilize 384-bit bus and run at 6000 MHz frequency with bandwidth of 288 Gb/sec per core. The incorporated PCB accommodates a single CrossFireX socket for the creation of various graphics configurations, including Quad-CrossFireX. Video interface panel boasts the availability of …

Cooler Master introduces power supply unit Silent Pro Platinum in denomination of 1000 and 550

The official website of Cooler Master describes detailed characteristics of the first PSU of

Silent Pro Platinum series. According to the statements, the contractor Enhance Electronics

has developed models with capacity of 550 and 1000 W. Their system effectiveness measure

(90% to 94% with 230v) distinguishes them among other offers. These measures also guarantee

moderate heat excretion.

Senior kilowatt power supply unit provides a supply of up to 984 watts of power on the +12 V

line, the youngest – up to 540 W. 135-mm fan on the hydrodynamic bearing is respective for the

cooling of both the representatives of the Silent Pro Platinum line.

In the composition of power sources heat-resistant capacitors made in Japan, the transformer

LP9, aluminum radiators, double EMI filter and active power factor correction mechanism

are used. Cooler Master reports about the possibility of constructing chords 4-Way SLI and

CrossFireX (with Silent Pro Platinum 1000W) and …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 07 September 2012, 16:14
Last visit: 07 September 2012, 16:14