GeIL Officially Introduces Zenith S3 SSD Series

GeIL, which is known for its high-end memory modules, drives, and other PC components, is going to release a new SSD series, codenamed Zenith S3. The series will embrace three models of 60GB, 120GB and 240GB capacity. All of them will be developed in 2.5-inch form-factor and will employ SATA III 6Gb/sec interface. The differentiation between the models is seen not only in their capacities but also in their speed performance, the index of which will be uncovered below.

Zenith S3 line is based on MLC NAND flash-chips designed under 25 nm technological process. As for the speed characteristics, all models in the series prove to demonstrate the maximal performance on random Write operations (4KB) – up to 70000 IOPS. When touching upon sequential speeds, each model shows different indeces:

— GZ25S2L-60G: maximal sequential Read speed – 500MB/sec, maximal sequential Write speed – 480MB/sec (recommended price — $70);

— GZ25S3L-120G: maximal sequential Read speed – …

NZXT Develops a New Generation of Phantom Chassis

NZXT, a company known for the development of multifarious hardware products for gamers and PC enthusiasts, announced a new generation of chassis, supplementing Phantom series. The first model designed under new technologies is codenamed Phantom 820 and will go in Full-Tower form factor. The company promises that the new product will preserve 'gaming-like' external integration with futuristic design, transparent acrylic window with bright lighting, and angular casing lines.

NZXT Phantom 820 will be compatible with a range of motherboard standards, including uITX, mATX, ATX, E-ATX, and XL-ATX. Its dimensions allow for the integration of six 3.5/2.5-inch drives, four 5.25-inch drives, nine slots for expansion cards of PCI standard, and graphics adapters of up to 350 mm in length (with two HDD bays). There is also a possibility to install a water-cooling system instead of pre-installed air-cooling system.

The nominal delivery stipulates the installation of two 200 mm fans (one …

TUL Takes Up Producing Brand PowerColor Graphics Adapter

TUL Corporation has announced the release of its brand high-performance graphics adapter, codenamed PowerColor Radeon HD 7950 Boost State Edition. The major peculiarity of the new product is the integration of GDDR5 memory type with 384 bit interface and support of multiple advanced technologies.

The model is based on black circuit board with the integrated Tahiti PRO chip, developed under 28 mm technological process. This chip accommodates 1792 current processors designed on Graphics Core Next architecture. This graphics adapter is compatible with PCI Express 3.0 x16 bus and DirectX 11.1 facility. The overall volume capacity of GDDR5 memory equals to 3072 MB. Heat management process is realized due to the two-slot cooling system of active type. The rear panel of the adapter is alloted for HDMI and DVI slots, as well as, for a couple of mini-DisplayPort ports.

The nominal frequency of graphics core equals to 850 MHz; nevertheless, the implementation of AMD PowerTune …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 28 November 2011, 02:12
Last visit: 11 August 2012, 15:56