Preliminary Acquaintance with VGA-Cooler MK-26 V2 from Prolimatech

Prolimatech Inc., an established manufacturer of high-end air-cooling systems, is about to release its new VGA-cooler, codenamed MK-26 V2. The upcoming product will be compatible with graphics cards from AMD manufacturer (up to Radeon HD 7000 Series) and Nvidia (up to GeForce GTX 600 Series). According to the preliminary data, the new cooler models will be capable to manage up to 320W of extra heat to provide for the most optimal GPU cooling down.



The major distinction of MK-26 V2 cooler is its impressive dimensions which equal to 230x146x47 mm. Thus, the cooler will take the spacing of five expansion slots, leaving no room for SLI/Crossfire. The cooler has got a copper base which accommodates six copper heatpipes, 6mm in gauge each pipe. Those pipes pierce two heterogeneous blocks consisting of thin aluminum fins which are designed in correspondence with Buckle Fin technology. The fins are distinguished by the unusual form that is called to promote for better heat removal …

LC Power Gaming 986 Series Сhassis Have Side Panels Made Out of Tempered Glass

The new LC Power chassis family has been presented. This line includes such models as Gaming 986S White Shadow and Gaming 986B Dark Shadow of the Midi-Tower type.

These products are made out of aluminum, and side panels are manufactured out of darkened tempered glass. Dimensions are the following: 482 × 223 × 467 mm, the weight is approximately 9 kg.



The LC Power Gaming 986 Series frameworks allow to mount the ATX, Micro-ATX and Mini-ITX typical size motherboards. There’s enough place for seven expansion cards, including discrete graphics accelerators of up to 420 mm length.


Users can embed up to five 3.5-inch drives and up to three 2.5-inch storage devices. The CPU cooler must be not higher than 170 mm.


In general these chassis can hold up to seven 120-mm fans – three on the front, two on top, one on the back side and one additional. There are two fans with backlighting in the supply kit.


The Gaming 986S White Shadow model is produced in the silver-white …

The Compulab IPC3 Mini-PC with Passive Cooling Goes for 693 USD

One of the latest products by Compulab is an IPC3 mini-PC, intended for industrial and commercial use. The lowest price of the basic model is 693 USD.



Outside dimensions of the framework are 160 х 190 х 40 mm. Due to its exterior construction the case provides overall passive cooling.


There’s a possibility to install 32 GB of RAM, a 2.5” storage drive, an M.2 2260 SSD and a couple of devices with an mSATA connector. The novelty features wireless interface adapters along with two USB 2.0, four USB 3.0, two Gigabit Ethernet, a DisplayPort 1.2, an HDMI 1.4a and an S/PDIF ports. However, special modules will be able to extend this set of connectors.


The Compulab IPC3 Mini-PC operates an Intel Kaby Lake CPU and is protected by the five-year manufacturer warranty.
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.36
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 06 March 2012, 18:52
Last visit: 06 March 2012, 18:52