Preliminary Acquaintance with VGA-Cooler MK-26 V2 from Prolimatech

Prolimatech Inc., an established manufacturer of high-end air-cooling systems, is about to release its new VGA-cooler, codenamed MK-26 V2. The upcoming product will be compatible with graphics cards from AMD manufacturer (up to Radeon HD 7000 Series) and Nvidia (up to GeForce GTX 600 Series). According to the preliminary data, the new cooler models will be capable to manage up to 320W of extra heat to provide for the most optimal GPU cooling down.



The major distinction of MK-26 V2 cooler is its impressive dimensions which equal to 230x146x47 mm. Thus, the cooler will take the spacing of five expansion slots, leaving no room for SLI/Crossfire. The cooler has got a copper base which accommodates six copper heatpipes, 6mm in gauge each pipe. Those pipes pierce two heterogeneous blocks consisting of thin aluminum fins which are designed in correspondence with Buckle Fin technology. The fins are distinguished by the unusual form that is called to promote for better heat removal …

Intel to Officially Unveil a Flagship Motherboard DZ87KLT-75K

Several days are left till the official introduction of a new flagship motherboard from Intel, known as DZ87KLT-75K (Kinsley). The board is based on an overclocking Z87 Express chipset and employs 8-phase CPU power supply system. Memory subsystem is represented by four DIMM slots for DDR3 modules, while expansion facilities involve three PCIe 3.0 x16 slots, three PCIe 2.0 x1 slots, a single PCI and a single mini-PCI slot. Storage capacities accommodate eight SATA III 6 Gb/sec ports.



Overclockers, as well as experienced users, will receive an opportunity of utilizing Power and Reset buttons right from the printed circuit board. This model offers 7.1-channel sounding, based on a corresponding controller, eight USB 3.0 ports, FireWire port, optical S/PDIF, a pair of gigabit Ethernet ports to enable network options, a single mini-DisplayPort and one Thunderbolt port. Frontal interface panel is able to propose a couple of USB 3.0 ports, Bluetooth 4.0 and Wi-Fi 802.11 b/g/n modules. … …

Deepcool Comes Out with Tesseract SW-RD Chassis

Deepcool Industries Co. Ltd. has expanded its production line with a new mid-tower case, entitled Tesseract SW-RD. The chassis features 472x210x454 mm dimensions and weighs 4.97 kg. It is made of galvanized SECC steel plates, boasting a large side acrylic window & black-and-red frontal frame. The top panel houses I/O panel with a pair of USB ports (both 2.0 and 3.0 versions are available) as well as a couple of audio ports.



Deepcool Tesseract SW-RD is compatible with mini-ITX, micro-ATX and ATX motherboards. The layout offers two external 5.25-inch slots, four internal 3.5-inch slots, three internal 2.5-inch slots, and seven slots for PCI expansion cards. All the racks are equipped with slides which facilitate installation of drives without any screws.


To continue, the case is ready to welcome 310-mm-long VGA cards, 168-mm-high CPU coolers as well as standard power supply units. The motherboard tray accommodates a dedicated notch that allows installing the CPU cooler …
DevID agent v4.36
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 16 September 2012, 14:53
Last visit: 16 September 2012, 15:14