Enermax to Announce a New Mid-Tower Case Fulmo ST

Enermax Technology, an established Taiwanese developer of various PC hardware components, is about to announce its new roomy PC case within the boundaries of Fulmo series. Codenamed Fulmo ST, the case is designed in mid-tower form-factor and is distinguished by massy dimensions. Featuring 485x244x513 mm, the product’s weight approximates 8.2 kg. The novice will be available in two color variations: gray (ECA3270A-G-BL) and black (ECA3270A-B-BL).



Fulmo ST is ready to accommodate up to eight PCI expansion cards, three 5.25-inch drives and eight drives either of 3.5- or 2.5-inch standard. The case is compatible with ATX and micro-ATX motherboards, quite lengthy graphics cards (up to 412 mm if demounting the top HDD/SSD bay), as well as rather lengthy dual-heatsink for the water-cooling system (up to 280 mm). The latter might be replenished by ten fans of either 120 mm or 140 mm dimensional type.


Upon the whole, Enermax will deliver its Fulmo ST case with three …

ARM Readies Cortex-A72 and Mali-T880 for Mobile Devices

ARM has just announced a series of solutions for the upcoming next-generation mobile SoC. The most notable developments are Cortex-A72 processor and Mali-T880 graphics. According to the manufacturer, both components will be interconnected within SoC by means of CoreLink – CCI-500. The launch of new items is scheduled for 2016. Rockchip, MediaTek and HiSilicon are among the companies to integrate both elaborations into their products.



It should be noted that Cortex- A72 is a successor of Cortex-A57, taking analogous 64-bit operations but demonstrating three times higher performance. The new-comer will be designed under 16 nm FinFET+ technological process. Its layout corresponds to big.LITTLE framework requirements; this promotes for its combination with other ARM cores.


As far as Mali-T880 GPU is concerned, it provides for 1.8 response time increase if compared with the Mali-T760 model. Herewith, its power consumption is reduced by 40%. Moreover, this GPU might support 4K …

Xilence presented Torino chassis for mainboards size Mini-ITX

Xilence Company has introduced its first hull with sizetype Mini-ITX – it got the name Torino (or the original codename — GEH-XP-TORINO). The manufacturer claims that the new product, despite its compact size, expressed by the dimentions 348 x 214 x 219 mm, is well suited for construction of «a full-fledged handheld gaming PC.»



Externally Xilence Torino made in the form of its older brothers, Interceptor and Interceptor Pro, and basic material of production is 0.8 mm thick steel. The hull is equipped with three external bays (one 5.25-inch size and two 2.5 inch size) and four internal (all sizes 3.5 inches). On the front panel there are two ports USB 3.0 display and two 3.5 mm jacks for headphones and microphone.


The rear panel of Xilence Torino has two bays for expansion cards. The installation of video cards up to 270 mm is also supported. According to reports of manufacturer, they fulfilled a goal of improving the ventilation of 3D-cards, which have specially …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 28 September 2011, 17:04
Last visit: 28 September 2011, 17:04