Akasa Prepares Its Euler for Upcoming Release

Recent global IT exhibition Computex 2012 has given promising prospects for Akasa company that introduced its new brand chassis. Codenamed Euler, this chassis might serve the basis for the noiseless mini-PCs. Due to the implementation of aluminum casing in design and its simultaneous substitute of a radiator, this device is able to function along with passive cooling system.



Akasa representatives have provided the Internet community with the first shots of Euler. Those pictures demonstrate that the future product will consist of a block which will remove the excessive heat from the CPU and its surrounding components. The model will support devices which show up to 35W TDP index. This chassis will be compatible with motherboards of mini-ATX form-factor and low-capacity two-core processors.


According to the words of the company's representatives, Euler is going to be released this September. The price policy has not been voiced so far, but hardware specialists are certain …

SilverStone to Out Kublai KL06 Chassis

SilverStone Technology is about to release a new PC chassis within the framework of Kublai series. The KL06 is a mini-tower solution, featuring 405x211x375 mm dimensions, made of stainless steel with an aluminum frontal panel and a ventilation grid. Along with a totally ‘blind’ model, the manufacturer offers a case with a side acrylic window (SST-KL06B-W). The recommended retail price will fluctuate within $92 mark.



SilverStone Kublai KL06 interior is differentiated by an unconventional location of the motherboard tray – on the left-side facet. The layout is ready to welcome micro-ATX, mini-ITX and mini-DTX mainboards with some high-performance parameters. In addition, there is space for two 5.25-inch drives, a single 3.5-inch drive, eight 2.5-inch drives as well as four PCI expansion cards.


The board supports the installation of two dual-slot graphics adapters of up to 342 mm in length and up to 177 mm in width, CPU coolers of up to 165 mm in height, and …

ID-Cooling Hunter Duet II Liquid Cooling System

ID-Cooling, being famous for its cooling systems, has released a Hunter Duet II cooler of large dimensions, which is supposed to transfer heat from the CPU and the graphics engine surfaces. This model is designed with a 360 mm heat sink, which is of great benefit to its efficiency factor.



The construction includes two water units with a base out of copper and built-in pumps, pipes in braided cable, the three-section aluminum 395 × 120 × 27 mm heat sink, three 120 mm fans, and an extraordinary framework with a 90 mm fan to blow over graphics card load-bearing elements and intensive plates for the CPU and GPU.


Though possessing similar construction, water units differ in lids design and the location of holes for liquid flow. At the moment their inner structure details are not available.

A compact fan to blow over VRM consumes 1.2 W. Its rotary speed is not higher than 1,500 rpm. The same ratio of each of the three main fans is not supposed to exceed 1,500–2,000 rpm.

AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.41
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 12 September 2011, 23:58
Last visit: 12 September 2011, 23:58