Meet New Series of 120-/140-mm SilentWings 3 Fans from Be Quiet!

Be Quiet! announces the upcoming release of a new series of fans, entitled SilentWings 3. The lineup will consist of 4x 120-mm & 4x 140-mm items. All greenhorns are based on fluid dynamic bearing, estimated for 300.000 hours of foolproof operation. The fans employ either 3-pin or 4-pin power connectors and might run at 12V voltage index.

Be Quiet! SilentWings 3 items have a dual purpose: they can be used as system fans and as a part of CPU cooling. The 3-pin models come equipped with an adapter for the reduction of voltage from 12V to 7-5V; due to this, their noise level dwindles down to the minimal level. In contrast, the 4-pin solutions support PWM technology.

All models are fitted with a 3-phase 6-polar motor which ensures low power consumption & inconsiderable vibrations. A unique shape of blades allows for the enhancing of airflow volume; at the same time, the incorporation of a slash frame promotes for the increase of the static pressure. Moreover, new mounts help in …

Greeting New HIS R7 260 iCooler 1GB GDDR5 Graphics Card

The lineup of graphics cards designed by HIS has been replenished with a new Radeon R7 260 model. Entitled HIS R7 260 iCooler 1GB GDDR5, the new-comer employs a typical PCI Express 3.0 x16 interface and comes with etalon clock frequencies. The R7 260 GPU (GCN, 28 nm) with 768 CUDA cores runs at 1000 MHz. It is accompanied by 1 GB of GDDR5 memory (128-bit bus) that operates at 1500 MHz/ 6000 MHz typical/effective frequency.

This adapter receives power through one 6-contact connector. Connectivity with PC monitors is realized due to three video ports: DisplayPort, HDMI and DVI-I. GPU and memory modules are cooled down by the forces of iCooler. It is not differentiated by an offbeat design; it consists of an aluminum heatsink and one low-profile fan.

Still, it offers acoustic convenience while fulfilling standard tasks: the maximal noise level does not exceed the limit of 28 dB. A supplementary aluminum heatspreader can be found in power supply section.

The HIS R7 260 …

ARM Readies Cortex-A72 and Mali-T880 for Mobile Devices

ARM has just announced a series of solutions for the upcoming next-generation mobile SoC. The most notable developments are Cortex-A72 processor and Mali-T880 graphics. According to the manufacturer, both components will be interconnected within SoC by means of CoreLink – CCI-500. The launch of new items is scheduled for 2016. Rockchip, MediaTek and HiSilicon are among the companies to integrate both elaborations into their products.

It should be noted that Cortex- A72 is a successor of Cortex-A57, taking analogous 64-bit operations but demonstrating three times higher performance. The new-comer will be designed under 16 nm FinFET+ technological process. Its layout corresponds to big.LITTLE framework requirements; this promotes for its combination with other ARM cores.

As far as Mali-T880 GPU is concerned, it provides for 1.8 response time increase if compared with the Mali-T760 model. Herewith, its power consumption is reduced by 40%. Moreover, this GPU might support 4K …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 04 May 2011, 14:51
Last visit: 04 May 2011, 14:51