LEPA to Release MX-F1 and MaxGold 1000 PSUs

LEPA is ready to release a new series of entry-level power supply units entitled MX-F1. The series counts three models of 400 W, 500 W and 600 W capacity: N400-SA-EU, N500-SA-EU and N600-SA. In addition, the company has expanded its MaxGold line with a flagship 1000-watt model. It corresponds to Intel ATX12V 2.4 standard and employs an optimized hardware design.



To begin with, MX-F1 PSUs offer 87% of ultimate efficiency. Operating at 20%/50%/100% loading, they are able to achieve 82%/85%/82% efficiency correspondingly. Nonetheless, the models cannot receive 80Plus Bronze certificate, since they feature limited voltage input range. All the models within the series employ a single +12V rail and boast a non-modular design.


This promotes for the connection of middle-efficiency components. They support Active PFC and a wide spectrum of protective functions (over-voltage, over-current, over-power, short-circuit). Cooling of internal components is ensured by a single 120 mm fan. …

ASRock Surfaces J3355B-ITX Mainboard

ASRock enters the market with a mainboard, targeting new Intel Apollo Lake CPUs (14 nm, Intel Goldmont micro-architecture). The J3355B-ITX model is thought to be integrated within laptops or entry-level all-in-one solutions. As seen from the codename, the board is developed in mini-ITX form-factor. It comes equipped with Intel Celeron J3355 processor, operating at 2.0-2.5 GHz frequency. The CPU features 10 W TDP; hence, cooling is backed by a noiseless passive cooler.



ASRock J3355B-ITX accommodates a pair of SO-DIMM slots for DDR3/DDRL3 modules with 1866 MHz frequency (up to 16 GB). The board comes with an integrated Intel HD Graphics 500 GPU that runs at 700 MHz. The connection of drives is realized via two SATA III ports. The incorporated PCIe 2.0 x16 slot is optimal for expansion cards, rather than a VGA card.


To continue, audio subsystem is based on 7.1-channel Realtek ALC887 controller, whereas network facilities are ensured with the help of Realtek RTL8111GR …

Cryorig Readies a Pair of Uncanny Ola & Taku Chassis

Cryorig, a renowned designer of CPU coolers & fans, decided to expand its expertise by developing a couple of one-off PC chassis – the Ola and the Taku. Both greenhorns are differentiated by an extraordinary design, a far cry from traditional tower-cases. They are thought to support mini-ITX motherboards and come with a pair of drive bays (2.5-/3.5-inch). The models will be promulgated within the framework of the Computex 2016.



Presumably, Cryorig Ola’s cylindrical case features 378.5x226x205 mm dimensions. Cryorig Taku positions itself as a monitor stand, featuring 567x270x134.8 mm dimensions. Their internal layout allows for the installation of SFX power supply units (130-mm long) as well as 280/240-mm long videocards. The permissible height of the CPU cooler makes up 82 mm & 42 mm correspondingly.


To continue, the Ola is considered to support CPUs with up to 100 W TDP. The case comes with multiple ventilation grids which are called to improve airflow. The top facet …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 13 July 2012, 23:17
Last visit: 01 October 2012, 06:06