Meeting New Gaming Memory Kits AMD Radeon RG2133



A couple of days ago AMD introduced a new series of DDR3 memory kits within the boundaries of AMD Unified Gaming Strategy development. Codenamed AMD Radeon RG2133, the new-comers are available in two- and four-channel kits, the overall capacity of which equals to 16 GB and 32 GB correspondingly. The most striking feature is that they can be employed as on AMD, so on Intel platforms, supporting AMD AMP and Intel XMP technologies for improved settings optimization.


The other peculiarity is that these memory kits run at 2133 MHz frequency. On such conditions there is always a chance to dramatically increase the system performance up to 22% (with APU AMD A10 on board). Herewith, voltage index equals to 1.65 V, while latency index looks the following way: 10-11-11-30. Memory chips are cooled down by the forces of a high-quality aluminum heatspreader. Its design is called to ensure a stable operation in response to the increased frequencies.


There is one more advantageous …

Deepcool Announces a Pair of Maelstrom Liquid Coolers

Deepcool has extended Maelstrom lineup of liquid coolers with two new models – the 120T and the 240T. The key distinction between the pair is the amount of 120 mm fans employed (one or two). Both come equipped with red LED backlights and show compatibility with the majority of update Intel & AMD platforms. The maximal supported CPU TDP level makes up 140/150 W.



Deepcool Maelstrom 120T comes with a single fan, whereas its companion, 240T, features a couple of fans, based on fluid bearing with 50.000 hours MTBF. The units run at 1800 RPM, creating up to 83.64/167.28 CFM and 17-34 dB of noise (depending on the model).


Both coolers employ a ceramic pump (70x85.6x31.5 mm), estimated for 120.000 hours of fail-proof operation & running at 2400 RPM. The pump features a copper base with micro-channels, connected with solid rubber hoses and an aluminum heatsink. The new-comers are linked to the system by means of 4-pin connectors.

Platinum PSU FSP Aurum 92+ 650W Review

Up-to-date power supply units are able to achieve 80-90% efficiency due to 80 Plus standard. The integration of this standard provides for better power-saving facilities, heat level and noise level. Still, some customers give preference to performance rather than energy saving; thus PSUs from FSP will become the most wise solution for such people. Last year FSP introduced Aurum series and today the company expands the line with a new model — Aurum 92+. The model is represented so far with a single power variation – 650W, and corresponds to 80 Plus Platinum requirements.



General Peculiarities


Correspondence to Platinum standards implies that FSP Aurum 92+ unit should demonstrate not less than 91% nominal efficiency, 90% efficiency at 20 percent loading, and 94% efficiency at 50 percent loading. Testing results prove the claimed characteristics, making this model a desirable high-end acquirement. Aurum 92+ is delivered in a standard cardbox that contains FSP logo …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.36
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 04 July 2012, 21:30
Last visit: 08 April 2013, 23:01