Inno3D Demonstrates Two GeForce GTX 650 Ti Boost Graphics Cards

As opposed to the army of companies that launched practically identical to the prototype GeForce GTX 650 Ti Boost graphics cards, Inno3D has elaborated two own versions which dramatically differ from Nvidia’s sample. The major difference lies in an efficient cooling system and production overclocking. The first model, marked as Inno3D GeForce GTX 650 Ti Boost iChill, is equipped with a highly efficient cooler ‘iChill’ and features 7% production overclocking. The other model, marked as Inno3D GeForce GTX 650 Ti Boost, comes without overclocked frequencies, although its hardware components promote for the conducting of various clock frequency tests.



Both novels take GK106 as the basis. The GPU is developed under 28 nm technological process and features 768 CUDA cores, 64 texturing blocks, and 16 rasterization blocks. In regard to frequencies, Inno3D GeForce GTX 650 Ti Boost iChill is clocked at 1050 MHz in nominal mode, but can be overclocked up to 1102 MHz in GPU Boost …

MSI works on development on three Mini-ITX motherboards based on chipsets A85, B75, and Z77

During August, MSI will release the two motherboards LGA1155 form-factor Mini-ITX, based on chipset Intel B75 and Z77. The first is positioned as a budget solution, the second is, in addition to support of overclocking Ivy Bridge K factor, will offer enhanced power system, and integrated Wi-Fi adapter and Bluetooth. Before the start of retail sales APU A-Series/Trinity (October) they will be joined by Mini-ITX motherboard based on chipset AMD A85.



From the pair of tiny “motherboards” B75/Z77 the greatest interest is for last one. The full codename of the model — MSI Z77IA-E53.


The upcoming model has seven power phases of processor socket with elements DrMOS and tantalum capacitors, power connector EPS12V 8-pin, two slots for RAM DDR3 (up to 16 GB of RAM) and a slot PCI Express 3.0 x16. Also, there are two SATA ports with a throughput of 3 and 6 Gb / s, single eSATA and mSATA (3 Gb / s). Jack mini-PCIe 5 GT / s is located directly above the mSATA — the original …

Enermax Outs High-Flown Twister Pressure Fan

One of the major requirements for an efficient CPU cooler is a high static pressure. The higher this index is, the more productive the blades are. Quite the contrary, the main requirement for a system fan is a volume of produced airflow, since it affects the air circulation within the case. Taking into account those facts, Enermax decided to elaborate a fan that would unite both demands. That is how Twister Pressure fan came into the market.



Enermax Twister Pressure is a high-efficiency fan targeting to be implementing within CPU cooling solutions. It is based on Twister Bearing 2, which framework has been optimized for a reliable operation under unfavorable thermal conditions (up to 85 degrees) and under high dust content. The second version of Twister Bearing is supposed to run over 160.000 hours in fail-proof mode; this is 60% more than the initial version could perform.


To continue, this fan offers three operational modes: Performance, Silent and Ultra Silent. All of …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.36
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 01 June 2012, 22:02
Last visit: 02 June 2012, 14:11