Company XFX is preparing Radeon HD 7970 GE with Double Dissipation cooler

American vendor XFX is about two weeks to release a Radeon 7970 Edition Double Dissipation (model code — FX-797G-TDF). It combines the capabilities of GPU Tahiti XT2 with a higher overclocking potential and the TDP, rather than at Tahiti XT, PCB reference design, but without a single phase power supply (6 +1), and the cooling system in the vaporizing chamber, an array of aluminum fins, PA plate (the same heatsink for the VRM and memory), as well as the two fans standard size 90 mm.

New model will get the recommended for the Radeon HD 7970 GE frequency ratio 1000/6000 MHz for core and chips GDDR5. The graphics chip will operate at 1050 MHz in the load. Recall that the “usual” HD 7970 was limited to regular frequencies 925/5500 MHz and did not support dynamic overclocking.

The configuration of video outputs is almost standard: from the five of DVI-I, DVI-D, HDMI and 2x Mini DisplayPort for some reason excluded DVI-D. The additional power is supplied by one 8-pin and one …

EKWB Launches a New Water Block for GV-N680SO-2GD

Early August of 2012 was marked for Gigabyte by the release of its one more graphics card, codenamed GeForce GTX 680 SOC (GV-N680SO-2GD). This card can boast the availability of high factory frequencies and quite mighty cooling system. The nominal frequencies have been heightened to 1137MHz, 1202MHz, and 6200MHz for memory. Such outstanding characteristics required the integration of a high-quality and high-performance cooling system which consisted of five(!) fans. This made the card rather voluminous, cumbersome and noisy. That was when EKWB decided to design a dedicated water block to be employed with this remarkable graphics adapter.

Water block EK-FC 680 GTX SOC is housed on a copper base, good-quality acetal cover, and rubber shims as a compressor. The model is delivered with pre-installed fixing stands to facilitate the installation. It should be noted that this water block entirely covers the frontal part of the graphics card, along with the adjacent RAM modules and …

Monitor Asus PA248Q Review

The market of displays is full of models with the 16:9 height-to-width aspect ratio, what can't be said about 16:10 models which go in quite scant supply. Still, the latter are of great demand among computer enthusiasts. The inventory of monitors produced by Asus includes models of various height-to-width aspect ratio. Currently, the company is introducing exactly 16:10 product, codenamed PA248Q. The chief peculiarity of Asus PA248Q is seen in the availability of USB 3.0 hub that offers advanced facilities for customers.


Design of monitor Asus PA248Q greatly resembles that of its predecessor, PA246Q. The frontal panel contains a red stripe and vertical control buttons. The display is dull and void of loud dirtying. The swivel gear allows the customer to rotate the display 92 degrees clockwise. The stand contains measurement marks with digits that show the degree to which it's possible to raise or rotate the monitor. Vertical control buttons are located on the right …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 19 May 2012, 15:31
Last visit: 24 May 2012, 18:06