Company XFX is preparing Radeon HD 7970 GE with Double Dissipation cooler

American vendor XFX is about two weeks to release a Radeon 7970 Edition Double Dissipation (model code — FX-797G-TDF). It combines the capabilities of GPU Tahiti XT2 with a higher overclocking potential and the TDP, rather than at Tahiti XT, PCB reference design, but without a single phase power supply (6 +1), and the cooling system in the vaporizing chamber, an array of aluminum fins, PA plate (the same heatsink for the VRM and memory), as well as the two fans standard size 90 mm.

New model will get the recommended for the Radeon HD 7970 GE frequency ratio 1000/6000 MHz for core and chips GDDR5. The graphics chip will operate at 1050 MHz in the load. Recall that the “usual” HD 7970 was limited to regular frequencies 925/5500 MHz and did not support dynamic overclocking.

The configuration of video outputs is almost standard: from the five of DVI-I, DVI-D, HDMI and 2x Mini DisplayPort for some reason excluded DVI-D. The additional power is supplied by one 8-pin and one …

Arctic Releases Cooling System for AMD Graphic Adapters

Swiss manufacturer of cooling systems, Arctic Cooling, has recently released a new cooler developed specifically for graphic adapters from AMD. Earlier this year the company launched the cooling system which is compatible with graphic adapters from Nvidia developers. The new product, codenamed Accelero Hybrid 7970, distinguishes from its predecessor also by the foot of water block which is upgraded to be compatible with AMD HD 7900 series.

Cooling system Accelero Hybrid 7970 consists of two parts which boast as air, so water cooling standards. It is able to manage up to 320W of hot air. The water block is cooled down by the 120 mm fan which is able to achieve the speed in the measures of 400-1350 rpm. The block, that is installed on the board, is equipped with 80 mm fan and is able to achieve from 900 to 2000 rpm speed. The noise level is dwindled down to the minimal index.

Arctic representatives claim that their new water block is 200% more efficient than the nominal …

Meet New Nifty Qs-240 Chassis from Aerocool

The lineup of Aerocool’s chassis has been replenished by a new classy PC case – the Qs-240. The model is designed in mini-tower format targeting micro-ATX or mini-ITX motherboards with maximum of 4 expansion slots. The inventory of external interfaces entails a pair of audio ports, the same number of USB 2.0 ports as well as a single USB 3.0 port.

Internal layout of Aerocool Qs-240 provides for two 3.5-inch drive bays & three 2.5-inch drive bays. Absence of high storage cages allows installing quite lengthy videocards (up to 320 mm) and quite high CPU coolers (up to 160 mm). ATX-compatible power supply unit is to be located in the bottom section of the chassis.

The case comes equipped with one 120-mm fan (rear). In addition, it’s feasible to integrate a pair of top fans and a pair of front ones (all of 120-mm dimensional type) which are accompanied by dust filters. Instead of frontal fans the customer might install 240-mm heatsink that is a part of a liquid cooling …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 08 September 2011, 18:50
Last visit: 08 September 2011, 18:50