Zalman Introduces Highly Efficient FX70 Passive Cooler

Zalman, a renowned South Korean designer of various hardware solutions, has recently introduced its latest CPU passive cooler, entitled FX70. The new-entry features 110x140x158 mm dimensions and comes without any fans. However, if there is a need to cool down CPUs with the TDP level higher than 80 W, the customer is free to enhance the facilities by adding two 120 mm fans. The latter are fixed to the heatsink by means of four brackets.



Zalman FX70 is an optimal choice for the following platforms: Intel LGA 2011/1366/115x/775 and AMD FM2/FM1/AM2/AM2+/AM3/AM3+. This cooler fits in any mid-tower ATX and larger PC chassis. The cooler’s framework consists of a copper base, pierced by six nickel-plated heatpipes, and of fifteen heatsink plates with an offbeat design, codenamed Twist; they are called to dramatically improve the process of heat management.


Fanless framework is regarded to be an advantage due to three reasons. First of all, pure heatsink provides absolutely no …

Spire Showcases New Cylinder-Shaped Swirl IV CPU Cooler

Spire is going to release a new extraordinary cooling solution: a cylinder-shaped CPU cooler, entitled Swirl IV. It is targeting Intel processors for Socket 2011/1366/115x/775 and AMD FM1/FM2/AM2/AM3 platforms with the maximum TDP level of 130 W. The new-comer has received RoHS and CE certification that proves its environmentally-friendly nature. An official release is postponed to January 2015.



Spire Swirl IV features 131x125x62 mm dimensions and weighs 690 g. Its heatsink consists of 45 aluminum fins, pierced by three copper zinc-plated U-shaped heatpipes (8 mm). Inside the heatsink one can find a 60 mm fan with blue LED backlit. Its rotational speed is controlled by PWM technology so that the blades could run between 600 RPM up to 2000 RPM.


The fan is equipped with a slide bearing, estimated for 50.000 hours of fool-proof operation. It is powered by means of a 4-pin connector, ensuring up to 83.12 CFM airflow at 26 dB noise. Besides, at the highest rotational speed the …

Computer Case be quiet! Silent Base 600 Overview (Part II)

Internal structure

The motherboard compartment is located above the power supply unit. In this regard, everything is quite standard for a Mid Tower class. A large cutout is made in a tray behind a CPU socket, to allow installation of a CPU cooling system directly into the case; a backplate mount (thrust-pad located on the back side of the motherboard) is used for this purpose.


The four large slots in a tray, equipped with the silicone membrane, are designed for proper cable management which looks very promising here. Plugs of expansion slots are attached by thumbscrews. The front part holds a hard disks’ basket for three drives.


At the back side a slot in a tray can be clearly seen to access cable management system slot. Also, the rear side contains two tool kits for installation of solid-state drives and size 2.5" hard disks.


The side cover is made of 0.7 mm steel, and from the inside has a thick vibration and noise absorbing coating. The recess in the …
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.37
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 10 September 2012, 13:32
Last visit: 10 September 2012, 13:32