Noctua Expands ‘A’ Fan Series

The line of Noctua’s A fan series has been enriched with three new models: NF-A9 92 mm, NF-A8 80 mm and NF-A4x10 5 V 40 mm. The triple is based on traditional SSO-2 bearings which provide for an optimal balance of lifespan (up to 150.000 hours) and noise level. In order to enhance the performance and reduce noise during operation Noctua equipped the fans with Advanced Acoustic Optimization frame, anti-vibration pads, and such technologies as Stepped Inlet Design, Inner Surface Microstructures and Flow Acceleration Channels.

Noctua NF-A9 model is an heir of a renowned NF-B9 version. It is available in two variations: NF-A9 PWM and NF-A9 FLX. The first one allows for dynamic alteration of operational speeds from 400 RPM to 2000 RPM; the other one offers three fixed speed indices (1050/1250/1600 RPM).

Noctua NF-A8 is a successor of NF-R8 model. It is available in three variations: NF-A8 PWM, NF-A8 FLX and NF-A8 ULN. The first fan is able to rotate at 450-2200 RPM speed …

Apacer Launches Memory Cards of SD and CF Format

Apacer Technology, world-known manufacturer of digital storage devices and memory cards, has introduced in a stately manner its latest ‘creations’, memory cards of SD and CF format, codenamed SD-M and CompactFlash5. The key feature of new products is the extended temperature range which allows the cards to show good operability under conditions of low temperatures (from -40 degrees centigrade) up to extremely high temperatures (to +85 degrees centigrade). The applied technology promoted for the expansion of these memory cards to a variety of areas, including aviation, military and automotive electronics.

According to the words of Apacer’s representatives, their memory cards are full-blown solid state drives with SD and CF interfaces. SD-M and CompactFlash5 are based on MLC NAND flash memory.

Memory cards with SD interface support SD 2.0 and Class 10 specifications, and will go in four volume capacity variants: 4, 8, 16, and 32 GB. Those cards are known to develop …

Cooler Master Gets Ready to Roll Out a Powerful V8 GTS Cooling System

Cooler Master is going to release V8 GTS CPU cooling system – the newest addition to V-series products. The model has got a spectacular design with a large heatsink block, two high-performance fans, and black plastic coverage. The overall cooler’s dimensions make up 154x149.8x166.5 mm. V8 GTS is differentiated also by a high compatibility with a range of CPU sockets, naming AMD AM2/AM2+, AM3/AM3+, FM2/FM1 and Intel LGA2011/1366/1156/1155/1150/775.

Unlike other air-coolers, an elaboration from Cooler Master can boast the availability of a vapor chamber in the framework. This chamber is known to spread heat much faster than heatpipes do and protects the CPU from overheating on heightened loading. Moreover, the presence of this vapor chamber guarantees that the heat is evenly distributed between all incorporated heat pipes.

Except the above mentioned components, V8 GTS framework consists of three independent heatsink blocks, eight copper heat pipes, and a pair of 140 mm …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 31 October 2011, 22:40
Last visit: 31 October 2011, 22:40