SilverStone Debuts with SST-ST30SF Power Supply

SilverStone Technology has recently introduced its newest SFX power supply unit. Codenamed SST-ST30SF, it features 125x100x63.5 mm dimensions and weighs 800 g only. The unit is estimated for 300 W power and is capable to demonstrate more than 81% efficiency in 230 V networks. High efficiency level allowed the model to gain 80Plus Bronze certificate.

The most uncommon feature ascribed to SST-ST30SF is that it can operate in passive mode if thermal conditions allow. The unit is equipped with a fan of 80 mm dimensional type; it starts rotating only when the surrounding temperature reaches 55 degrees. This promotes for a considerable power reduction and practically silent work when the fan gets disabled. An average noise level on active operation makes up 18 dB.

SilverStone furnishes the new entry with a single +12V rail, estimated for 22 A current. In its turn, +3.3V rail is estimated for 21 A current, while +5V rail – for 20 A current. It should be noted that this unit …

SilverStone Debuts with SX700-LPT Power Supply Unit

SilverStone is readying to launch a powerful 700-watt PSU, entitled SX700-LPT. The new-comer boasts 80Plus Platinum certificate, since its efficiency level might reach 94%. The model is developed in SFX-L form-factor and supports Intel ATX 12V 2.4 standard. SilverStone has already listed the unit on its official site; thus, customers might expect the market launch in the nearest future.

SilverStone SX700-LPT employs a single +12V rail with the maximal output capability of 58.4 A. This power supply unit is able to operate within 90-264 V range at the peak power index of 750 W. If there is a need, it’s possible to use the entire power stock via +12V bus, rather than distributing it via +3.3 V or +5 V rails.

The model comes with a modular cable system. The inventory includes connectors for the connection of 9 SATA devices as well as 4 videocards with an additional 6+2-pin PCI-e connector. The unit is fitted with all necessary protection mechanisms, entailing SCP, OPP, OPT, …

Inno3D Demonstrates Two GeForce GTX 650 Ti Boost Graphics Cards

As opposed to the army of companies that launched practically identical to the prototype GeForce GTX 650 Ti Boost graphics cards, Inno3D has elaborated two own versions which dramatically differ from Nvidia’s sample. The major difference lies in an efficient cooling system and production overclocking. The first model, marked as Inno3D GeForce GTX 650 Ti Boost iChill, is equipped with a highly efficient cooler ‘iChill’ and features 7% production overclocking. The other model, marked as Inno3D GeForce GTX 650 Ti Boost, comes without overclocked frequencies, although its hardware components promote for the conducting of various clock frequency tests.

Both novels take GK106 as the basis. The GPU is developed under 28 nm technological process and features 768 CUDA cores, 64 texturing blocks, and 16 rasterization blocks. In regard to frequencies, Inno3D GeForce GTX 650 Ti Boost iChill is clocked at 1050 MHz in nominal mode, but can be overclocked up to 1102 MHz in GPU Boost …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 28 October 2012, 16:26
Last visit: 15 November 2012, 04:50