New chassis Aerocool XPredator - Evil Blue and Devil release

One of the popular chassis series Aerocool — XPredator – is relevant again, thanks to the emergence of two new design options the Evil Blue and Devil Red. Apart from a small «cosmetic repairs» newcomers got two ports USB 3.0.

Full-Tower hulls of XPredator Evil Blue and Devil Red (respectively, black and blue and black and red) are made from cold rolled galvanized steel with a thickness of 0.8 and 1.0 mm. Their weight is about 13.4 kg, dimensions — 600 (H) x 234 (W) x 555 (D).

Inside, can be placed the motherboard form factor XL-ATX, E-ATX, ATX, microATX and Mini-ITX, ten PCI Express expansion cards up to 330mm, CPU cooler up to 185mm, ATX-compatible power supply, six 3 5-inch hard drives and the same amount of devices size 5.25 ". Kit includes two 230-mm fans: Front with lighting and rear without lighting.

Ease of assembly is guaranteed by the availability for screwless installation of drives and video cards, holes with rubber «curtains» for cables and …

PowerColor Intros New Graphics Card with Fling Force Cooler

TUL Corporation, in the framework of its PowerColor brand, introduces a new graphics card with quite an original way of air cooling organization. The new-coming adapter, codenamed PowerColor Radeon HD 7850 Fling Force, employs 'two-storied' cooler of an unusual structure. Along with an aluminum heatsink, copper heat pipes, and a voluminous fan, the manufacturer implemented non-monolithic fan ribs. Their tips are fixed to the main part in a way to change their location relative to the plain of rotation.

On conditions of low rotational speed, tips of the ribs are located at approximately 80 degrees angle relative to the graphics card. On conditions of heightened speed, the ribs become more linear; this way, the impeller diameter enlarges from 92 mm to 95 mm. Such structural approach to the fan framework develops into an improved performance and air cooling effect.

The model is based on Pitcairn chip, developed on Graphics Core Next architecture under 28 nm technological …

QNAP to Come up with TS-x51 NAS Series

QNAP, a well-known designer of network and CCTV monitoring solutions, is glad to come up with a new series of NAS devices – the TS-x51. The series is currently introduced by two models with two and four drive sections. They are intended to operate under the base of Microsoft Hyper-V, Windows Server 2012, VMware VSphere, Citrix XENServer platforms. Both new-comers are housed in stylish white enclosures that match either home or corporate environment.

The TS-x51 storages are based on Intel processor with 2.4GHz clock frequency. It is accompanied by 1 GB RAM (DDR3L), 7.1-channel audio controller, and Wi-Fi 802.11ac adapter via an independent USB key. These NAS support the installation of SSD/HDD/SSHD drives of 3.5-inch form-factor with SATA III 6 Gb/sec interface. The frontal panel accommodates activity indicators, Power and Reset buttons, as well as a single USB 3.0 port.

To continue, both versions of storages offer imagery-data recording options and support virtual …
Get computer-assisted driver search with our brand utility *
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 18 September 2012, 17:36
Last visit: 18 September 2012, 20:21