Plextor Prepares the Release of M5P SSD

Plextor is currently preparing a new SSD series, codenamed M5P. According to the forecasts, this series will be differentiated by high-performance characteristics and Serial ATA 3.0 interface. M5P will be represented by three models of 128 GB, 256 GB and 512 GB volume capacities. All the model lines are developed with the utilization of 19 nm technological process. In addition, all SSDs will be equipped with NAND flash-memory (MLC Toshiba) and Marvell 88SS9187 controllers.



Three models differ from one another by the flash-memory volume. Thereby, 128 GB models accommodates 256 MB of DDR3 cache-memory, 256 GB model – 512 MB, and the last one, 512 GB model – 768 MB. Those SSDs support SATA 6 Gb/sec.


The manufacturer claim that the maximal consecutive reading and writing speeds will achieve 540 Mb/sec and 340 Mb/sec correspondingly (with 128 GB model); 256 GB and 512 GB models will achieve 540 Mb/sec in reading and 450 Mb/sec in writing mode. At the same time, M5P series …

Aerocool to Advance Project 7-Chassis 1

Aerocool has just announced the release of a new stylish chassis, codenamed Project 7-Chassis 1. The greenhorn is distinguished not only by a catchy exterior but also by a spacious interior. The case houses a side window, made of a tempered glass, as well as a LED backlight on the front panel; the latter is regulated by means of dedicated buttons on the top facet.



Featuring 550x446.4x244.6 mm dimensions, Aerocool Project 7-Chassis 1 is ready to welcome motherboards of mini-ITX/micro-ATX/ATX format with up to 7 expansion slots. There are six slots in total for the mounting of drives: a pair of 3.5-inch bays and four 2.5-inch items. The layout allows for the integration of a 165-mm high CPU cooler and a 400-mm long video card (+ a standard ATX PSU).


The model comes equipped with a single pre-installed 120-mm fan on the rear plate. There is a possibility to enhance cooling with the help of five additional fans, mounted on the front and top panels. The user is able to manage …

An All-new Series of Super Flower Power Supply Units Is Introduced by 10 Devices of 400–850 W Capacity

The Super Flower Co. is widely known by virtue of its 80Plus Titanium power modules. At present this manufacturer is going to present a cutting-edge series of low-profile devices.



The latest line will include ten power supplies, the capacity of which varies in the range of 400–850 W depending on the model. Those of them providing 750 W and more will get partially detachable cables.


Being optimized by Super Flower professionals, the topological layout of these Super Flower products is based on the two-transistor forward converter. PWM and PFC schemes are designed with a Fairchild controller and Infineon field-effect transistors. Hardware components also incorporate STMicroelectronics and Mospec diodes, a Fujitsu relay and a Teapo electrolytic capacitor.


All models of this series are intended for Super Flower OEM customers and comply with 80Plus Bronze standards.
AUTOMATIC SEARCH & INSTALL
device drivers
Freeware
Download (9MB)
DevID agent v4.36
* The Utility requires installation. Upon installation and running DevID Agent will detect
which devices require drivers and which drivers require updates.
The Utility doesn't contain viruses or malicious code
Registered at: 02 November 2012, 18:23
Last visit: 02 November 2012, 18:52